Installation Guide

ii
www.sharkbite.com
THE TOTAL
PLUMBING SOLUTION
DONE.CUT:
Cut the pipe square removing rough
edges and debris. Mark the pipe to
the correct insertion depth.
PUSH:
Push pipe and fitting together
up to the depth mark.
*Using the disconnect clip,
fittings can be easily changed,
removed and reused.
SHARKBITE
®
FITTINGS / PIPE SIZE COMPATIBILITY / PIPE INSERTION DEPTH
Nominal Size of
Fitting
Nominal Size of Pipe Pipe OD Size Pipe ID Size
Pipe Insertion
Decimal
Depth Fraction
1/4" 1/4" CTS 3/8" 0.305" 0.81" 13/16"
3/8" 3/8" CTS 1/2" 0.350" 0.94" 15/16"
1/2" 1/2" CTS 5/8" 0.475" 0.95" 15/16"
5/8" 5/8" CTS 3/4" 0.652" 1.13" 1-1/8"
3/4" 3/4" CTS 7/8" 0.671" 1.13" 1-1/8"
1" 1" CTS 1-1/8" 0.885" 1.32" 1-5/16"
1-1/4" 1-1/4" CTS 1-3/8" 1.055" 2.0" 2"
1-1/2" 1-1/2" CTS 1-5/8" 1.245" 2.25" 2-1/4"
2" 2" CTS 2-1/8" 1.629" 2.50" 2-1/2"
1/4" compression 1/4" ACR 1/4" 0.190" n/a
3/8" compression 3/8" ACR 3/8" 0.311" n/a
1/2" SharkBite End
15/16"
Pipe
Insertion Depth