Position flathead screwdriver at intersection of bottom wall and raised test cap. 2 Hit screwdriver until it penetrates under test cap.
3 4 Rotate Here Rotate Here Rotate screwdriver lifting up test cap. Reach in with hand or pliers and remove test cap.
1 Position flathead screwdriver on the inner knockout score. 3 Hold valve tight with channel lock pliers. Unscrew and remove locknut. Replace on desired side of outlet box. 2 Tap screwdriver with hammer until knockout is loosened. Remove with hand. Repeat for other valve location. 4 Crimp piping to valve adapter according to pipe manufacturer's installation instructions.