Install Instructions
9
MAKING A SHARKBITE
®
UNIVERSAL CONNECTION
Frequently Asked Questions (FAQs)
SharkBite
®
EvoPEX
™
Q. Are SharkBite EvoPEX fittings, SharkBite Universal
brass fittings, and SharkBite PEX Pipe UV resistant?
A. SharkBite Universal brass fittings can be used in sunlight
when installed on copper or CPVC. SharkBite PEX Pipe and
EvoPEX fittings are UV resistant for up to one (1) month.
Q. Are tools needed for SharkBite EvoPEX or SharkBite
Universal brass fittings?
A. No tools are required to make a fitting connection. PEX
cutters are required for cutting PEX pipe. Proper pipe
cutters and deburring tools are needed for other pipe types
used with Universal fittings.
Q. What is the insertion depth for SharkBite EvoPEX
fittings?
A. Insertion depth will depend on the size of the fitting. Push
the SharkBite PEX Pipe into the SharkBite EvoPEX fitting
until green indicator ring appears in collet window. The
visual appearance of the green indicator ring through the
collet window is verification that the pipe is fully inserted
for a proper connection.
Q. What is the insertion depth for SharkBite Universal
brass fittings?
A. Insertion depth will depend on the size of the fitting. Push
the SharkBite PEX Pipe into the SharkBite Universal brass
fitting per the insertion depth below for each fitting size:
1/4" Pipe Insertion Depth = 13/16"
3/8" Pipe Insertion Depth = 15/16"
1/2" Pipe Insertion Depth = 15/16"
5/8" Pipe Insertion Depth = 1-1/8"
3/4" Pipe Insertion Depth = 1-1/8"
1" Pipe Insertion Depth = 1-5/16"
Q. Can SharkBite EvoPEX and SharkBite Universal brass
fittings be removed?
A. SharkBite EvoPEX fittings are a permanent connection
with PEX Pipe only and cannot be removed. SharkBite
Universal brass fittings can be removed with SharkBite
Disconnect Clips or Disconnect Tongs.
Q. Can SharkBite PEX Pipe be installed to a water heater?
A. SharkBite PEX Pipe should not be installed closer than
18" of the water heater unless specified otherwise by local
code. SharkBite corrugated and stainless steel braided
water heater connection hoses may be installed directly to
a water heater. SharkBite Tank Booster is a thermostatic
mixing valve with connections that may be installed
directly to a water heater. Please reference www.sharkbite.
com for more information regarding SharkBite water
heater connectors and Tank Booster thermostatic mixing
valves.
Q. Is there a minimum space requirement between
fittings?
A. SharkBite EvoPEX fittings have no space requirement
between fittings; whereas SharkBite Universal brass
fittings require 1" spacing between fittings for removal if
needed.
Q. Do extreme temperatures in excess of 140° Fahrenheit
in an attic aect the quality or performance of
SharkBite fittings?
A. SharkBite EvoPEX fittings are suitable for attic
applications with temperature pressures of (80 PSI @
200˚F (93˚C), 100 PSI @ 180˚F (82˚C), and 160 PSI @
73.4˚F (23˚C)) when installed as per the installation
instructions and relevant plumbing codes.
Q. What are additional precautions to take during the
installation process with SharkBite EvoPEX fittings?
A. Prevent the EvoPEX fittings from coming in contact with
primers, solvent cements, and other solvents. When using
firestops, spray polyurethane foam (SPF) insulation, or
other expanding fillers, protect the EvoPEX fittings from
contact by wrapping (polyethylene wrap min. 2 layers) the
fittings in areas where contact is possible. Recommend to
use SharkBite silicone wrap #25406. Only use dishwashing
liquid soap and water to detect plumbing leaks. Avoid
using 'Leak Detector' spray products..