How to Guide

SharkBite
®
EvoPEX
™
Sales & Specifications Sheet • Issue Date July 2015
www.evo-pex.com · 2727 Paces Ferry Road · Building 2 · Suite 1800 · Atlanta · Georgia 30339 · USA
US Contact: 1-877-700-4242 · [e-mail] · Canadian Contact: 1-888-820-0120 · [e-mail]
A Division of Reliance Worldwide Corporation
DESCRIPTION
SharkBite EvoPEX Fittings are for use in residential or commercial systems and approved for
potable water and glycol (up to 100% mix) in hot and cold domestic water systems as well as
radiant heating systems. SharkBite EvoPEX fittings are intended to be installed with SharkBite
PEX pipe as a holistic system.
FEATURES AND BENEFITS
Instant push-to-connect ends for quick installation, immediate testing, and ease of use:
ID pipe seal, permanent connection, visual indicator to confirm connection, no tools,
solder, clamps, rings, unions, or glue required.
TECHNICAL DATA
Performance:
Pressure @ Temperature Ratings
80 psi @ 200°F
100 psi @ 180°F
160 psi @ 73.4°F
SharkBite Materials:
Item
Material
1 – Body
Acudel
2 – Collet
Grilamid
3 – Collet Retainer
SST 304
4 – Radial Seal
EPDM
5 – Grab Ring
SST 316
6 – Protection Ring
Copolymer
7 – Spacer
Copolymer
CERTIFICATIONS
SharkBite
®
EvoPEX
™
fittings 1/2", 3/4" and 1":
Certified to ASSE 1061 and CSA B125.3 standards.
Listed to ASSE 1061, NSF/ANSI 61, NSF 372, by IAPMO.
UPC, IPC, and NPC of Canada compliant
Patent pending
SPECIFICATION
SharkBite EvoPEX fittings shall be installed on SharkBite PEX complying with ASTM F876 or
CSA B137.5. The fittings shall be made of Engineered Polymer and be compliant with ASSE
1061 or CSA B125.3. The fittings shall be used in a potable water or radiant heating/cooling
system not to exceed 80 psi @ 200°F, 100 psi @ 180°F, or 160 psi @ 73.4°F