Installation Guide

4
Making a SharkBite EvoPEX Connection
When cutting SharkBite PEX Pipe, ensure that the
ends are cut square and the surface is smooth.
Ensure that both the EvoPEX pipe and fitting are
clean and free of dirt and debris in preparation for
making a connection.
STEP 1
Push the pipe into the fitting firmly (a twisting
action reduces insertion force). Take care to avoid
inserting the pipe at an angle.
STEP 2
Ensure that the pipe is pushed into the fitting fully
and engaged properly by checking that the green
indicator ring is fully visible in all four slots. This
ensures a permanent connection.
STEP 3
EvoPEX_Installation Instructions_2018_FINAL.indd 4 5/29/18 7:35 AM