Specification

Characteristics:

Push fit fittings that have a quick assembly push fit mechanism that can be used with

Copper, PEX and CPVC tubing and pipes. Fittings for use in domestic and commercial

application for both potable water distribution systems and hydronic heating systems.

Push fit fittings can be utilized in underground applications and as manufactured

joints without access panels. To be installed in accordance with the manufacturer's

instructions and the latest edition of the Uniform Plumbing Code and the National

Plumbing Code of Canada.

Products listed on this certificate have been tested by an IAPMO R&T recognized

laboratory. This recognition has been granted based upon the laboratory's compliance

to the applicable requirements of ISO/IEC 17025.

Products are in compliance with the following code(s):

Uniform Plumbing Code (UPC)

National Plumbing Code of Canada

International Plumbing Code (IPC)

Products are in compliance with the following standard(s):

ASSE 1061-2011

MODELS:

Note: The requirements of Section 609.3.2 in the Uniform Plumbing Code are satisfied for push fit

fittings by section 301.4.1 of the same Uniform Plumbing Code when installed in accordance with the

manufacturer's installation guides.

Note: All 1/2" through 1" models comply with ANSI/NSF 14.

For a complete list of compliant models and the most up to date listing, please visit

http://pld.iapmo.org/file_info.asp?file_no=0004630