Specification

31
5001 E. Philadelphia Street, Ontario, CA 91761-2816 • [phone] • Fax [phone] •
www.iapmort.org
CERTIFICATE OF LISTING
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both
to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well
as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any
recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction.
Effective Date:
October 2013 -Rev. 11/6/2013-
Void After: October
2014
Product:
Crosslinked Polyethylene Water Distribution System
(PEX)
File No. 7143
Issued To:
CASH ACME/RELIANCE WORLDWIDE
2400 7TH AVE SW
CULLMAN, AL 35055
Identification:
The tubing shall be marked with the manufacturer's name or trademark,
ASTM F876 and ASTM F877 PEX, pressure rating at 180° F, nominal size,
standard dimension ratio and a code number identifying the compound and
the date of manufacture. The fittings shall be marked with the
manufacturer's name or trademark, and ASTM F877. Both tubing and fittings
shall be marked with the cUPC® certification mark.
Characteristics:
Crosslinked polyethylene plastic hot and cold water distribution systems
made in one standard dimension ratio and intended for a maximum of 100
psi water service up to and including a maximum working temperature of
180° F. Components are comprised of tubing and/or fittings. To be
installed in accordance with the manufacturer's instructions and the
requirements of the latest edition of the Uniform Plumbing Code.
Products listed on this certificate have been tested by an IAPMO R&T
recognized laboratory. This recognition has been granted based upon the
laboratory's compliance to the applicable requirements of ISO/IEC 17025.
Products are in compliance with the following code(s):
Uniform Plumbing Code (UPC®)
National Plumbing Code of Canada
International Plumbing Code (IPC®)
Products are in compliance with the following standard(s):
ASTM F877-2011a and CSA B137.5-2009
For a complete list of compliant models and the most up to date listing, please visit
http://pld.iapmo.org/file_info.asp?file_no=0007143