Brochure

1-877-700-4242 www.sharkbitepro.com
THE SHARKBITE
®
CONNECTION SYSTEM
10-CAC-045 08.01.10 Printed in USA
CERTIFICATIONS
The SharkBite
®
push-t ttings have been design certied and listed to ASSE 1061/NSF 61. The SharkBite
®
push-t ttings are listed by IAPMO and
are certied for potable and hydronic heating water distribution (note: Glycol mixture for hydronics is not to exceed 100% concentration). The SharkBite
®
push-t ttings have been certied for underground applications and as a manufactured joint without access panels and they meet UPC, IPC and cUPC
requirements. Please consult with local plumbing codes concerning specic applications.
The SharkBite
®
tubing without oxygen barrier is approved for all model codes in the US and Canada for use in potable water systems and is certied
to the following standards: NSF 14/61, NSF P171, ASTM F 876, ASTM F 877, CSA B137.5 and AWWA C904.
The SharkBite
®
tubing with oxygen barrier is approved for use in all model codes in the US and Canada for use in hydronic and potable water systems
and is certied to the following standards: NSF 14/61, NSF P171, ASTM F 876, ASTM F 877, CSA B137.5 and AWWA C904.
Note: The SharkBite
®
push-t ttings are not approved for use with chrome-plated pipe. SharkBite PB Couplings are designed to work with
ASTM D3309 spec polybutylene, do not install onto damaged or decayed PB pipe.
Distributed by Reliance Worldwide Corporation
2100A Southbridge Parkway Suite 380
Birmingham, Alabama 35209
1-877-700-4242 or 1-205-803-4500 Fax: [phone]
In Canada:
1-888-820-0120 • FAX: [phone] • cashacme.ca
Product details at sharkbitepro.com
www.sharkbitepro.com
SharkBite
®
Fittings/Tube Size Compatibility
Nominal Size
of Fitting
Nominal Size
of Tubing
Tubing
OD Size
Tubing
ID Size
1/4" 1/4" CTS 3/8" 0.305"
3/8" 3/8" CTS 1/2" 0.350"
1/2" 1/2" CTS 5/8" 0.475"
5/8" 5/8" CTS 3/4" 0.652"
3/4" 3/4" CTS 7/8" 0.671"
1" 1" CTS 1" 0.885"
1/4"
compression 1/4" ACR 1/4" 0.190"
3/8" compression 3/8" ACR 3/8" 0.311"
Note: 1/4" push-t connector ends require use of 3/8" OD CTS size PEX, CPVC or hard drawn Type K, L and M
and annealed Type M copper complying with ASTM B 88. SharkBite
®
connector ends are not approved for use
with chrome plated pipe. If it is necessary to use chrome plated tubing, the chrome nish should be completely
removed from 1" of the tubing ends.