Install Instructions

5
PEX Tube Support Liner Removal
The tube liner is not necessary with CPVC or
Copper tubing, and may be removed based
on preference or local codes. The tube liner
can be easily removed by pulling it past the
o-ring, then with the aid of the SharkBite
®
disconnect clip or disconnect tongs (both
sold separately), the Tube Support Liner can
drop out of the tting as it can move freely
past the grab ring. Needle nosed pliers may
be used to pull the Tube Support Liner out.
Gently work the Tube
Support Liner past the o-ring
Stop once the Tube Support
Liner has been pulled past
the o-ring, the Tube Support
Liner cannot be pulled out any
further due to the grab ring.