-877-700-4242 1
1-877-700-4242 The SharkBite CONNECTION SYSTEM ® Includes Push-Fit and Barb Products and PEX Tubing Contents Introduction 2-3 SharkBite® Push-Fit Fittings 4-6 Stops and Fixture Supply Fittings 7 Push-Fitting Tools 7-8 Valves with Push-Fit Connectors 8-9 Temperature and Pressure Gauges 8 ® SharkBite PEX Tubing 9-10 ® SharkBite Barb Fittings 10-13 Valves with Barb Connectors 12 Barb Angle & Straight Stops 12 PEX/Barb Accessories 12-14 Clamp a
1-877-700-4242 INSTALLATION AND DISCONNECTION Easy Installation Fast Disassembly Ensure the pipe is cut square, using the deburr tool (U702) – remove rough edges/debris and mark the pipe for correct depth. Push pipe and fitting together up to the depth mark. Using the simple disconnect clip or tongs, fittings can be easily changed and reused. The SharkBite ® CONNECTION SYSTEM Lightning Fast. Won’t Let Go. • Connects copper, CPVC and PEX pipe in any combination.
SharkBite Push-Fit Products ® SharkBite® continues to lead the industry with an expansive line of fittings, valves and other innovative, labor saving products for plumbing projects. SharkBite® push-fit fittings are the fastest, easiest way to join copper, CPVC and PEX in any combination with no soldering or glue. Certified: 200 psi & 200˚F (93˚C). Use for new installation and repair of potable water distribution systems. See certifications & approvals on page 16.
Drop Ear Elbows Female Centre Slip Tees SIZE P/N P/N (Lead Free) 3/8" (1/2" OD) X 1/2" FNPT U332 U332LF 1/2" U249 U249LF 1/2" X 1/2" FNPT U334 U334LF 3/4" X 3/4" FNPT U340 U340LF SIZE P/N P/N (Lead Free) U335 SIZE P/N P/N (Lead Free) 1/2" FNPT (SLIP) U3482 U3482LF 3/4" FNPT U462 U462LF 3/4" FNPT (SLIP) U3486 U3486LF 1" FNPT U464 U464LF End Stops Hy-Ear Elbows 1/2" X 1/2" FNPT Slip Run is only suitable for Copper and CPVC U335LF SIZE P/N P/N (Lead Free) 3
Run is only suitable Slip Fittings Slip for Copper or CPVC Slip fittings simplify repair by doing the job that two couplings and extra pipe used to do. Only one end of the coupling has a stop, allowing the other end to slide freely over the end of a pipe. The fitting can be released with a disconnect tool and slid back onto the other end of the pipe for successful leak repair.
Service Slip Tee Adapters Stop & Fixture Supply Fittings Connecting supply lines to fixtures and appliances using these new SharkBite® products brings the speed and convenience of push-fit connections to the final phase of your plumbing jobs. Regular and chrome plated fittings are now available, including the newest 1/2" X 1/4" (3/8" OD) SharkBite® stop valves. Stops in 1/2" X 3/8" or 1/4" compression sizes are also available.
Disconnect Clips SIZE P/N P/N (Lead Free) 1/4" U706 Lead free compliant 3/8" U708 Lead free compliant 1/2" U710 Lead free compliant 5/8" U3712 Lead free compliant 3/4" U712 Lead free compliant 1" U714 Lead free compliant SharkBite® x SharkBite® with Drain/Vent SIZE P/N P/N (Lead Free) 1/2" with drain 3/4" with drain 1" with drain 22304-0000 22305-0000 22306-0000 – – – SharkBite Gauges ® Use to measure or monitor water conditions in water distribution systems.
Integral Connectors for Thermostatic Valves With SharkBite Direct Connectors ® SIZE P/N P/N (Lead Free) EB-35 1/2" EB-35 3/4" EB-35 1" EB-45 1/2" EB-45 3/4" EB-45 1" 22670-0045 22671-0045 22672-0045 22673-0045 22674-0045 22675-0045 – – – – 23394-0045 23398-0045 Includes 3 CTS tailpieces. Use with SharkBite® push-fit fittings to easily connect a Heatguard valve to 1/2" and 3/4" pipe. Heatguard 110-D with gaskets purchased separately.
DIAMETER 3/4" PEX Blue, Red or White LENGTH 5’ straight 10’ straight 20’ straight 25’ coil 50’ coil 100’ coil 300’ coil 500’ coil DIAMETER BLUE U870B5 U870B10 U870B20 U870B25 U870B50 U870B100 U870B300 U870B500 RED WHITE U870R5 U870R10 U870R20 U870R25 U870R50 U870R100 U870R300 U870R500 U870W5 U870W10 U870W20 U870W25 U870W50 U870W100 U870W300 U870W500 1" PEX Blue, Red or White LENGTH 5’ straight 10’ straight 20’ straight 100’ coil 300’ coil 500’ coil BLUE U880B5 U880B10 U880B20 U880B100 U88
Sweat Adapters Reducing Elbows SIZE P/N P/N (Lead Free) 3/8" X 1/2" Male 1/2" X 1/2" Female 1/2" X 1/2" Male 1/2" X 1/2" Male (5 Pack) 3/4" X 3/4" Female 3/4" X 3/4" Male 1" X 1" Female 1" X 1" Male UC593 UC600 UC607 UC607A5 UC606 UC608 UC605 UC609 – UC600LF UC607LF UC607LFA5 UC606LF UC608LF UC605LF – Polybutylene Adapters (with PB Crimp Rings) SIZE P/N P/N (Lead Free) 1/2" X 3/8" 3/4" X 1/2" 3/4" X 5/8" UC272 UC274 UC273 UC272LF UC274LF UC273LF^ Drop Ear Elbows S
Ball Valves with PEX/Barb Ends SIZE P/N P/N (Lead Free) 1/2" 3/4" 1" 22461 22462 22463 22461LF 22462LF 22463LF Regulators with PEX/Barb Ends SIZE P/N P/N (Lead Free) EB-25 3/4" EB-25-400 3/4" EB-25 1" EB-25-400 1" EB-35 3/4" EB-35 1" EB-45 3/4" EB-45 1" 22865-0045 22866-0045 22867-0045 22868-0045 22364-0045 22365-0045 22798-0045 22799-0045 – – 23140-0045 – – – – – TMV with Barb and Check Valves SIZE P/N P/N (Lead Free) HG-110-D 1/2" barb with checks HG-110
Polymer Pipe Insulators for PEX Straight Connectors SIZE P/N P/N (Lead Free) SIZE P/N P/N (Lead Free) 1/2" X 1/2" MNPT UP120 Lead free compliant Polymer Insulated Suspension Clamps for PEX SIZE P/N P/N (Lead Free) 1/2" CTS 3/4" CTS 1" CTS 23074A10 23075A10 23076A10 Lead free compliant Lead free compliant Lead free compliant Reducing Connectors 3/4" X 1/2" MNPT Use for potable water distribution and other water systems.
Clamp Rings PEX Clamp Tools SIZE P/N P/N (Lead Free) 3/8" 1/2" 5/8" 3/4" 1" UC952 UC953 UC954 UC955 UC956 Lead free compliant Lead free compliant Lead free compliant Lead free compliant Lead free compliant For use with SharkBite® Barb 3/8", 1/2", 3/4" and 1" fittings and SharkBite® PEX tubing.
APPLICATIONS Add New Service Lines and Equipment Use SharkBite® slip tees and other fittings to add a service line or install equipment such as expansion tanks, ice-makers or humidifiers. Wet or Dry Repairs There’s no faster way to make a repair -- wet or dry. You can connect copper, CPVC or PEX pipe in any combination. Cut. Push. Done. Water Heater Flex Connectors Install or replace a water heater. It’s a breeze with SharkBite® flexible connectors or the Water Heater installation kits.
CERTIFICATIONS The SharkBite® push-fit fittings have been design certified and listed to ASSE 1061/NSF 61. The SharkBite® push-fit fittings are listed by IAPMO and are certified for potable and hydronic heating water distribution (note: Glycol mixture for hydronics is acceptable up to and including 100%). The SharkBite® push-fit fittings have been certified for underground applications and as a manufactured joint without access panels and they meet UPC, IPC and cUPC requirements.
