Submittal Sheet

Description
The SharkBite
®
Water Heater Connectors are used in residential and commercial
applications to connect the hot and cold supply lines to the water heater. The
connectors are EPDM knitted with braided stainless steel. The connectors are
available in 12", 15", 18" and 24" lengths. The connections on the connectors
are 3/4" FIP X 3/4" SharkBite
®
. The SharkBite
®
connection allows the installer
to connect to copper, PEX and CPVC tubing eliminating the need for an
additional transition fitting.
features anD benefits
SharkBite Connection:
Eliminates the need for additional transition ttings,
Connects to OD controlled copper, PEX, and CPVC tubing.
Ease of use:
No soldering or glue.
Available in 12", 15", 18", 24" lengths:
No cutting pipe.
Design certied and agency listed:
Inspector friendly, peace of mind.
SharkBite
®
Flexible Braided Stainless Steel
Water Heater Supply Connectors
Specifications: HA001 • Issue Date December 2008
A Division of the Reliance Worldwide Corporation
Cash Acme • 2400 7th Avenue SW • Cullman, AL 35055-0278 • 1-877-700-4242 • Fax: [phone] • www.cashacme.com
specification
The SharkBite
®
Water Heater Connectors shall be used with residential and
commercial water heaters. The SharkBite
®
Connection shall be connected
to copper (ASTM B88), PEX (ASTM F876) and CPVC (ASTM D2846). The
SharkBite
®
Water Heater Connectors shall be used with water in accessible
locations only.