Specification

ManualsBrandsSharkBite ManualsPlumbing Product3/4 in. Plastic PEX 90-Degree Barb Elbow (5-Pack)

Specifications: BA001

DESCRIPTION

SharkBite

tubing is a cross-linked polyethylene tubing used for potable

water application. The tubing is printed with a SharkBite

imprint pattern that

provides a visual aid to determine if the tube has been inserted all the way

into the SharkBite

push-fit fitting. This feature only works if the tubing is cut

between the SharkBite

imprint pattern.

FEATURES AND BENEFITS

Tubing printed with SharkBite

imprint pattern:

Allows for easy assembly with SharkBite

push-fit fittings without

use of elaborate and costly tools.

SharkBite

tubing:

Strong, flexible, resilient tubing that provides superior

temperature performance.

Complete connection system:

System provides a wide selection of fittings and tubing to

ensure a trouble-free rough-in.

Listed to NSF 14 and CSA B137.5 for use in potable water systems:

Inspector friendly, peace of mind!

Manufactured and tested to meet or exceed the requirements of the

ASTM F-876, ASTM F-877, ASTM F-2023 and CSA B137.5:

Specify and install with confidence!

Variety of connections options, SharkBite

PEX can be connected with

SharkBite

push-fit fittings, or Cash Acme barbed fittings:

Flexible installation options.

System shall be plumbed using SharkBite

Tubing cross-linked polyethylene pipe

and all joints shall be made using SharkBite

push-fit fittings or brass Cash Acme

barbed fittings with clamps. Tubing and fittings shall be installed as outlined in the

SharkBite

PEX installation manual.

SPECIFICATION

SharkBite

PEX Tubing

Without Oxygen Barrier

Specifications: HD002 • Issue Date December 2008

Performance:

Maximum Working Pressure:

160 psi @ 73.4°F (23°C)

100 psi @ 180°F (82°C)

80 psi @ 200° F (93°C)

Materials:

Tubing ....................PEX-B cross-linked polyethylene

SPECIFICATION DATA

CERTIFICATIONS

The SharkBite

tubing is approved for use in all model codes in the US and Canada for use in hydronic and potable

water systems and is certified to the following standards: NSF 14/61, NSF P171, ASTM F-876, ASTM F-877, CSA

B137.5 and AWWA C904.

A Division of the Reliance Worldwide Corporation

Cash Acme • 2400 7th Avenue SW • Cullman, AL 35055-0278 • 1-877-700-4242 • Fax: 1-877-700-4280 • www.cashacme.com

08-CAC-304 12.04.08 Printed in USA

Summary of content (2 pages)

PAGE 1
Specifications: HD002 • Issue Date December 2008 Specifications: BA001 SharkBite PEX Tubing Without Oxygen Barrier ® Description SharkBite® tubing is a cross-linked polyethylene tubing used for potable water application. The tubing is printed with a SharkBite® imprint pattern that provides a visual aid to determine if the tube has been inserted all the way into the SharkBite® push-fit fitting. This feature only works if the tubing is cut between the SharkBite® imprint pattern.
PAGE 2
Specifications: HD002 • Issue Date December 2008 SharkBite PEX Tubing Without Oxygen Barrier ® specification data Nominal Tubing Size Model ID Length OD Bend Radius Fluid Capacity Per 100’ Package Weight ft M in mm gal ltrs lbs kgs 15 15 15 100 300 500 30.48 91.44 152.40 4 4 4 102 102 102 0.53 0.53 0.53 2.01 2.01 2.01 4.5 13.5 23 2.0 6 10.4 1/2" 1/2" 1/2" 15 15 15 100 300 500 30.48 91.44 152.40 4 4 4 102 102 102 0.53 0.53 0.53 2.01 2.01 2.01 4.5 13.5 23 2.0 6 10.