Brochure

3
SECTION 1: THE SHARKBITE CONNECTION SYSTEM
PRODUCT DESCRIPTION PART NUMBER QTY/BAG
SECTION 1: THE SHARKBITE CONNECTION SYSTEM
1-A: CORE FITTINGS
COUPLINGS
1/4" (3/8" OD) X 1/4" (3/8" OD) U004LF 6
3/8" (1/2" OD) X 3/8" (1/2" OD) U006LF 6
1/2" X 1/2" U008LF 12
3/4" X 3/4" U016LF 12
1" X 1" U020LF 6
LARGE
DIAMETER
1-1/4" X 1-1/4" (For PEX applications, stiffeners are sold separately) UXL0135 1
1-1/2" X 1-1/2" (For PEX applications, stiffeners are sold separately) UXL0141 1
2" X 2" (For PEX applications, stiffeners are sold separately) UXL0154 1
REDUCING COUPLINGS
1/4" (3/8" OD) X 1/2" U050LF 6
3/8" (1/2" OD) X 1/2" U009LF 6
3/4" X 1/2" U058LF 12
1" X 3/4" U060LF 6
LARGE
DIAMETER
1-1/4" X 1" (For PEX applications, stiffeners are sold separately) UXL013528 1
1-1/2" X 1" (For PEX applications, stiffeners are sold separately) UXL014128 1
1-1/2" X 1-1/4" (For PEX applications, stiffeners are sold separately) UXL014135 1
2" X 1-1/2" (For PEX applications, stiffeners are sold separately) UXL015441 1
SLIP FITTINGS
SharkBite slip couplings and tees are ideal for repairing and tapping into existing rigid pipe lines. The slip
feature ensures the pipe is fully engaged into the fitting when the pipe is in a fixed position. The slip end
is only suitable for use with Copper and CPVC pipe.
SLIP COUPLINGS (SLIP END ONLY SUITABLE FOR COPPER AND CPVC)
Slip couplings are the most efficient way to repair a burst pipe or leak. Slip fittings simply repair by doing the job that two couplings and
extra pipe used to do. Only one end of the coupling has as stop, allowing the opposite end to slide freely over the end of a pipe. The fittings
can then be released with a disconnect tool and slid back onto the other end of the pipe for a successful connection and leak repair.
1/2" X 1/2" U3008LF 3
3/4" X 3/4" U3016LF 3
1" X 1" U3020LF 1
LARGE
DIAMETER
1-1/4" X 1-1/4" (For PEX applications, stiffeners are sold separately) UXL0635 1
1-1/2" X 1-1/2" (For PEX applications, stiffeners are sold separately) UXL0641 1
2" X 2" (For PEX applications, stiffeners are sold separately) UXL0654 1
FEMALE CONNECTORS
1/4" (3/8" OD) X 1/2" FNPT Reducing U066LF 6
3/8" (1/2" OD) X 1/2" FNPT Reducing U070LF 6
1/2" X 1/2" FNPT Straight U072LF 12
CUT:
Cut the pipe square removing
rough edges and debris.
Mark the pipe to the correct
insertion depth.
PUSH:
Push pipe and fitting
together up to the
depth mark.
DONE.
Using the disconnect
clip, fittings can
be easily changed,
removed and reused.
HOW TO INSTALL SHARKBITE PUSH-TO-CONNECT PRODUCTS