Product Overview

Specications: HB001 • Issue Date January 2012
Tee
Straight
Coupling
Elbow
SharkBite® 2XL
For Copper, CPVC, or PEX Pipe
LARGE BORE SharkBite Commercial is an extensive range of SharkBite Fitting and full ow Ball Valves in
sizes 1¼”, 1½”, & 2” Copper Tube Size (CTS) suitable for use with Copper, PEX,(SharkBite Tube Liner must be
tted to the PEX Pipe) and CPVC pipe. Use in commercial and residential applications for potable water,
hydronic heating, chilled water and general water distribution for irrigation.
DESCRIPTION
FEATURES AND BENEFITS
Quick Connect:
No tools, soldering, clamps, unions or glue required. Cut pipe square, de-burr to remove rough
edges/debris, mark the pipe for correct depth and push to get a pressure ready connection every
time.
Quick Disconnect:
Disconnect in seconds by sliding the De-Mount Tool down the pipe to engage the demount lugs and
rotate clockwise to lock the open position leaving both hands free, you can now remove the pipe.
SAFE-Recessed Release Collar:
Commercial SharkBite require a special Demount Tool and cannot be accidentally
disconnected/released.
Extensive Range Including Slip Feature on Couplings and Tee’s:
When repairing or tapping into existing pipe with “Push-Fittings” you must be able to either move the
tting or the pipe to ensure the pipe is engaged fully into the tting. With rigid pipe like copper the
only way with “Push-Fittings” is to have a SLIP feature to allow easy installation when tapping into
existing pipe.
Easy Installation:
Unlike the tool intensive connection methods there is NO need to send multiple tters to a job,
SharkBite Commercial has been designed to be installed or removed by one person. All ttings are
lubricated for easy connection and by tting the De-Mount Tool before engaging the pipe the force
required can be reduced further.
With the De-Mount Tool locked on you also have hands free disconnection.
WET OR DRY: No waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an
instant connection in seconds.
No Tools:
Unlike alterative tool intensive connections systems, SharkBite has no special tooling required for
installation.
No Time:
Fastest connection - CUT-PUSH-DONE.
Easy access to small or conned places.
No Flame - Does not require re permit or re marshal.
No Waste:
Should you make an error or simply want to change your installation, no problem for SharkBite.
Simply remove and re-use. (Fittings used for repeated testing must not be used in any permanent
application).
Fittings Cannot be Disassembled:
SharkBite Commercial Fitting are factory assembled and components cannot be removed.
Long Pipe Engagement:
Provides pipe support against lateral pipe forces.
Lead Free (LF) Dezincication Resistance (DZR) Brass:
Exceeds current no lead legislation - AB1953 or NSF372. Suitable for underground installation subject
to local code authorites/inspectors. Dezincication properties (DZR) exceed ISO6509 and NSF-14.
Environmentally Friendly:
Remove and re-use ttings, no need to be scrapped.
No heat is required for installation.
SPECIFICATION
SharkBite Commercial ttings are designed to operate over a wide range:
Temperatures from 20°F to 200°F.
Maximum working pressure of 200psi.
Design for use on ASTM B88 hard drawn & annealed copper type K, L, or M, ASTM F876 & F877 PEX and
ASTM D2846/D2846M CPVC water pipe.
A Division of the Reliance Worldwide Corporation
Cash Acme • 2400 7th Avenue SW • Cullman, AL 35055-0278 • 1-877-700-4242 • Fax: [phone] • www.SharkBite.com