User Guide

ManualsBrandsSharkNinja ManualsCoffee MakersSharkNinja CF091 Coffee Makers 50 oz. Silver

CF091 SERIES

HOT OR COLD FROTHING AT YOUR FINGERTIPS

DRIP STOP CLEANUP

For how-to videos and more, visit ninjacoffeebar.com | Questions? 1-877-646-5288

The water reservoir lid is removable for

easy cleaning and is dishwasher safe.

1. Add milk to your cup

until it is about

⁄3 full.

2. Hold the cup under the

frother and submerge

the whisk just below the

surface of the milk. Froth

for 30–45 seconds.

3. Remove the frother whisk by

twisting clockwise. Keep your

cup below the whisk while

you carry it to your sink or

dishwasher for easy cleaning.

CAN’T WAIT FOR THAT FIRST CUP?

THEN DON’T

Simply close the drip stop to pause the carafe

brew cycle, and then pour your ﬁrst cup.

Reopen the drip stop to continue the brew.

STOP THE DRIPS AFTER THE BREW

At the end of a brew, close the drip stop to

prevent drops of coffee from escaping.

REMOVABLE BREW BASKET

FOR EASY CLEANUP

To avoid spills and drips, keep the

ﬁlter inside the removable brew

basket as you carry it to the trash.

PLUG IN, POWER UP, AND PRE-HEAT

Plug in your brewer, then press the power

button. The PRE-HEATING light will

illuminate for 3 minutes.

When the light goes out,

you’re ready to brew some

steaming hot coffee.

FILLING THE WATER RESERVOIR

PRE-HEAT FOR THE HOTTEST FIRST CUP

FILL TO THE MAX LINE.

Fill to the max line and let Auto-iQ

™

take it from there.

BEFORE YOUR

FIRST BREW

Before ﬁrst use, run two Full Carafe

Clean cycles. With your water reservoir

ﬁlled to the max line with fresh water,

your brewer plugged in, and the carafe

in place, press the CLEAN button to

start a cycle.

(Discard the brewed water after each cleaning cycle.)

CAUTION: DO NOT reach across top of brewer to froth during brewing. Steam is released from vent on top of

brewer and can result in a steam burn.

Please make sure to read the enclosed Ninja

Owner’s Guide prior to using your unit.

PRE- HEATING

Pre-heating ensures

your ﬁrst cup will

be as hot as it

possibly can be.

(But if you don’t

have time to wait,

you can still brew

before pre-heat is

fully activated.)

For hot froth, microwave for

45–60 seconds.

For cold froth, skip to Step 2.

FOR HOT FROTH

QUICK START

GUIDE

Summary of content (2 pages)

PAGE 1
CF091 SERIES Please make sure to read the enclosed Ninja Owner’s Guide prior to using your unit. ® HOT OR COLD FROTHING AT YOUR FINGERTIPS QUICK START GUIDE 1 FILLING THE WATER RESERVOIR FOR HOT FROTH 1. Add milk to your cup until it is about 1⁄3 full. BEFORE YOUR FIRST BREW Before first use, run two Full Carafe Clean cycles. With your water reservoir filled to the max line with fresh water, your brewer plugged in, and the carafe in place, press the CLEAN button to start a cycle.
PAGE 2
3 4 POSITIONING YOUR MUG OR CARAFE CHOOSE YOUR FILTER 5 THE BREWING PROCESS—4 EASY STEPS HOW TO BREW CLASSIC, RICH, OR OVER ICE CUP TRAVEL MUG 1 2 CHOOSE A SCOOP 3 CHOOSE A SIZE 4 CHOOSE A BREW Simply press your desired brew type button and the brew will begin. CLASSIC Smooth, wellbalanced flavor. Pull the handle to swing the brew basket open. RICH Richer than classic with more intense flavor that really stands up to milk, cream, or flavoring.