Specifications

2-BAY RAID BOX
4.2 Connecting to a PC
5. Set RAID mode
1. ToggletheRAIDswitchtothedesiredRAIDmode.
2. Switchonthedevice.
3. Press“Mode”.ThedesiredRAIDmodeisset.
 AssoonastheLEDforHDDactivityashesblue
 thedevicemaybeaccessed.
6. Remove defective RAID HDD
 IncaseaHDDinsideaRAIDarraygetsdefective,
 theLEDforHDDactivitywillpermanentlyashred.
 InaRAID1thedatacanberestoredbyrebuildingthe
 array(see7.).
 DatafromanexistingRAID0,StandardorCombined
 modearelost.ChangethedefectiveHDD.