Owner manual

5-BAY RAID BOX
5.2 Clear existing RAID
Note:
Before deleting an existing RAID make sure to
backup your data as they will be lost afterwards!
 1. Switchoffthedevice.
 2. ToggletheRAIDswitchonthedevice’sbackside
  to“ClearRAID”.
 3. Press“Set”andpoweronthedevicesimultaneously.
 4. ThedevicewillbeepandtheexistingRAIDis
  erased.
5.3 Set RAID mode
 1. Switchoffthedevice.
 2. ToggletheRAIDswitchonthedevice’sbackside
  tothedesiredRAIDmode.
 3. Press“Set”andpoweronthedevice
  simultaneously.
 4. ThedevicewillbeepandthedesiredRAID
  modeisset.
5.4 Remove defective RAID HDD
 IncaseaHDDinsideaRAIDarraygetsdefective,
 thefrontLEDsforHDDactivitywillceaseandthe
 devicewillbeepuntilthe“Set”buttonispressed.
 InaRAID1,3,5and10arraythedatacanbe
 restoredbyrebuildingthearray(see5.5).