Owner manual

5-BAY RAID BOX
 DatafromanexistingRAID0orCombinedmode
 arelost.ChangethedefectiveHDDanddeletethe
 RAIDarray(s.5.2).
5.5 Rebuild
Note:
The new HDD must provide at least the same
capacity as the replaced one.
Do not change the RAID mode prior to the rebuilding.
Do not change the HDD order before commencing
the rebuild process.
 1. Switchoffthedevice.
 2. ChangethedefectiveHDD.
 3. Poweronthedevice,therebuildprocedure
  willstartautomaticallyevenwhenthedevice
  isdisconnectedfromyourPC.
6. Important notes
 After5minutesofinactivitythedevicewillswitch
 tosleepmode.DuringsleepmodeallHDDsand
 thebuilt-infanswillbeswitchedoff.
 Sleepmodeendsassoonasthedeviceisaccessed.