Instruction Manual

BANDIT
9. Installation of an additional 3.5" device
(1.Removethecase’sfrontpanelbygentlydraggingittowardsyou(g.19.)
fig. 19
2. Dismantle the 5.25" front bezel from the mounting bay in which you intend
to install the drive by loosening its screws and pushing the bezel to the
 inside(g.20).Removethequickfasteners(g.21).
fig. 20 fig. 21
 (Carefullytakeoutanoptionallypresentmetalbezelcoveringthedrivebay
 byusingagripper.)
3. Place the 3.5" device into the mounting frame for 3.5" devices and screw it to
 themountingframefrombothsides(g.22).
(Mountingframefor3.5"devices)
fig. 22
4. Slide the mounting frame with installed 3.5" device into the case’s drive bay
 (g.23)andattachittothedrivebayfrombothsidesusingthequick
 fastenersforODDs(g.24).
fig. 23 fig. 24
Note:
If you intend to transport the case we recommend securing (additionally) the
installed drives.