User guide

FURIOUS

2. Slide the HDD with attached mounting rails into the case’s HDD cage until they lock

  (g.11).

g.11

3. Connect the HDD to the power supply and the mainboard.

Note:

A maximum of four 3.5" HDDs may be installed into the HDD cage. More HDDs may

be installed to the mounting bays for 5.25" drives at the case’s front using e.g. the

SHARKOON Vibe-Fixer mounting frames.

7. Installation of an optical device

1. Openthecase’sfrontbezel.

2. Removethe5.25"frontbezelofthemountingbaywhereyouintendtoinstallthedrive

  bylooseningitsscrewsandpushingthebezeltotheinside(g.12).

g.12

ENGLISH