User guide

FURIOUS

3. Attachthemountingrailstotheopticaldevicefrombothsides(g.13).

g.13

4. Slide the optical device with attached mounting rails into the case’s drive bay until

  theylock(g.14).

g.14

5. Connect the optical drive to the power supply and the mainboard and close the case’s

  frontbezel.

(Screwsfor5.25"drivemounting)

Note:

If you intend to transport the case we recommend to additionally secure the installed

drive by using screws.

In case the installed device is not ﬂush with the front bezel, you can adjust the

mounting rail’s retaining pins.

ENGLISH