User guide

FURIOUS

5. Slide the 3.5" device with attached mounting rails into the case’s drive bay until they

  lock(g.18).

g.18

6. Connect the 3.5" device to the power supply and the mainboard and close the case’s

  frontbezel.

Note:

In case the installed device is not ﬂush with the front bezel, you can adjust the

mounting rail’s retaining pins.

9. Installation of an add-on card

1. Unlockthexationclip(pullupwards),takeitawayandremovetheslotbezel(g.19

  and20).

g.19 g.20

ENGLISH