Instruction Manual

NIGHTFALL

2.Insert the add-on card into the mainboard’s respective slot and x it to the case by

 re-attachingthexationscrew(g.22).

 g.22

10. The pre-installed fan

1. The pre-installed 120mm front fan provides a 4-pin PSU connector and a 3-pin mainboard

plug.

2.ConnectoneofbothplugstoeithertherespectivePSUor(tocontrolthefanspeedviathe

 mainboard)thematchingmainboardconnector.

11. Installation of additional fans / optimized airﬂow

1.Placethefanagainsttherespectivebracketfromtheinside(e.g.inthetoppanel/g.23).

 g.23