Instruction Manual

NIGHTFALL
4. Installation of a mainboard
1. Open the case by loosening the thumb screws on the case’s back side and removing the left
 sidepanel.Laydownthecasesidewiseonanevensurface.
2.The mainboard’s mounting panel inside the case provides various drillings to x the
 stand-offs(g.1).
 g.1
 Themainboardcontainsspecialscrewopenings(g.2).
 g.2
Place the mainboard to the mounting panel. A stand-off must be screwed into every dril-
ling of the mounting panel visible through the mainboard’s screw openings.