Manual

REBEL9 PRO (EcOnOmy, vaLuE and windOw)
3.Screwthemountinganglestothe3.5"devicefrombothsides(g.16).
 g.16
4.Slidethe 3.5"devicewithattachedmountingrailsintothecase’sdrivebay(g. 17)and
 screwittothedrivebayfrombothsides(g.18).
g.17g.18
5.Connectthe3.5"devicetothepowersupplyandthemainboard.
6.Screwthe5.25"bezelwith3.5"openingintothefrontpanel(g.19)andplaceitbackonto
the case.
5.25"bezelwith3.5"opening
g.19