Manual

REBEL9 PRO (EcOnOmy, vaLuE and windOw)
9. Installation of an add-on card
1.Removetheslotbezel’sxationscrewandtakeawaytheslotbezel(g.21).
 g.21
2.Insert the add-on card into the mainboard’s respective slot and x it to the case by
 re-attachingthexationscrew(g.22).
 g.22
10. The pre-installed fans (Value and Window Edition only)
1.Thepre-installed120mmfansprovidea4-pinPSUconnectoranda3-pinmainboardplug
each.
2.ConnectoneofbothplugstoeithertherespectivePSUor(tocontrolthefanspeedviathe
 mainboard)thematchingmainboardconnector.