Datasheet

3.2 Installing the device
1. First connect the HDD to the controller.
Please make sure that all contact pins
are completely seated in the connector
socket and the device label is pointing
upwards (fig. 2).
2. Slide the device module into the
enclosure. The module can only be
inserted correctly as shown below
(fig. 3).
13
SWIFT-CASE 2.5”
3. Installation
3.1 Benötigte Teile
A - Gehäuse samt IDE-Controller
B - Schraubendreher
C - Montageschrauben (2 x)
D - 2,5“ Laufwerk (nicht enthalten)
E - USB-Kabel
SWIFT-CASE 2.5”
4
B
A
C
E
D
fig. 2
fig. 3
Manual_2.5_new 11.11.2005 9:04 Uhr Seite 15