Owner manual

USB LANPORT 100/400

9. Examples of use

9.1 Network use

(single user, IP address manually assigned)

 UserAwantstointegratetheUSBLANPortintohislocalnetworkandconnectsthedockingstationtohisrouterusing

 theincludedpatchcable.HeplugsaSATAHDDandaUSBsticktotheUSBLANPort;hisIPaddresseswerecongured

manually; a DHCP server is not activated.

 Router:192.168.10.1

 Computer:192.168.10.2

 UserAinstalledtheincludedsoftwareonhiscomputerandstartsitbydouble-clicking(leftmousebutton)onthe

 desktopicon:

 Theserversoftware’suserinterfacewilldisplaytheUSBserver:

The software has detected the USB server and assigned it a standard IP address, but this address is from another address

 range(errormessage:“indifferentnetworksegment”).Thedevicemaynotbeaccessedyet;rsttheservermustbe

 assignedanIPaddressfromthelocalnetwork’saddressrange.Right-clickingtheUSBserver’sentryinsidetheuser

 interfacebringsuptheserver’scontextmenu:

