Owner manual

USB LANPORT 100/400

 Theblue“deviceavailable”iconindicatesthattherespectivedevicemaybemounted.ForthisAselectsthedevice(1xleft

 click)andthenleft-clicksthebutton“connectdevice”.Theoperatingsystemwillinstallallrequireddriverswhereupon

the device will be displayed in the Windows Explorer. The icon in the user interface will change and now indicate that

 theHDDhasbeenlocallyconnected:

 AnowcanusetheHDDasifitwasdirectlyconnectedtohiscomputer.

 UserBwantstoaccesstheHDDconnectedtotheUSBLANPortfromthelivingroom.Thereforeherunsthealready

 installedserversoftware.Theuserinterfacewilldisplaytheserverwithallconnecteddevices:theicon“remote

connection” indicates that the HDD currently is not available; the button “connect device” is disabled.

 BnowcansendadisconnectrequesttothecurrentuserAviathedevicecontextmenu:

 UserAwillreceivethefollowingrequestandcannowdecidewhetherheagreestodisconnectthedevice

 “OK”ornot“Cancel”:

