Owner manual

USB LANPORT 100/400

5.3 USB server context menu

 A – Invokestheserver’scongurationwindow:

   a – DenetheUSBserver’sname

   b – DHCPon(manualIPaddressoff)/DHCPoff

(manual IP address on)

   c – DecidewhichUSBport(s)shallautomaticallybe

mounted at program start

   d – “Set“savesandactivatesyoursettings“Cancel“

discards them

   e – Theentries“BackupFirmware“,“Firmwareupdate“,

“Change password“ and “Server restart“ (see below)

 B – Callsupthewebinterface(below6.)

5.3.1 Backup ﬁrmware

 TheUSBserveroffersthepossibilitytobackupthermware.Thepop-upwindowalreadyoffersatargetpath

for the backup ﬁle. Via “Browse” you can change this default path. “Submit” starts the backup, “Cancel” will terminate

the action. In this input window you may assign a new password. This password is required to conﬁgure different

settings of the USB server.

5.3.2 Firmware update

In case you have a more actual version of the USB server’s ﬁrmware available you may update the current ﬁrmware

version via this entry. With “Browse” you select the locally saved update version. “Submit” starts, “Cancel” terminates

 theupdateprocedure.Acurrentrmwareversioncanbefoundatwww.sharkoon.com.

5.3.3 Change password

In this input window you may assign a new password. This password is required to conﬁgure different settings of the

USB server.

5.3.4 Restart server

 SelectthisentrytorestarttheUSBserver.Arestartmaybenecessarywhentheserverdoesnotreactorotherproblemshave

occurred. You may also force a restart by pressing the reset button on the device.

