Manual WPM V2 Serie V2
Table of Contents 1. Features 3 2. Specifications 4 2.1 Overview 4 2.2 Temperature range and humidity 5 2.3 Mains voltage and protective functions 5 2.4 Safety standards 5 2.5 Warranty period 5 3. Parts and accessories 6 4. The modular system of the PSU 7 4.1 The terminals on the PSU 7 4.2 The modular cables 7 4.3 Cable lengths 8 5. Installation 9 5.1 Installing the PSU into a PC case 9 5.2 Connecting mainboard and graphics card(s) 9 - 10 5.
Dear Customer, Congratulations and thank you for your purchase of this high-quality Sharkoon product. To ensure a long service life, and full functionality of the product, we recommend that you read this manual thoroughly. We hope you enjoy our product! SHARKOON Technologies 1. Features High efficiency: This power supply has an efficiency of over 80%. The efficiency is the ratio of energy input and output performance in percent.
To prevent the risk of electric shock, do not open the power supply case. No user-exchangeable parts are inside. Refer service and maintenance to authorized Sharkoon personnel. Warranty is void under unauthorized attempt to open the power supply housing Suitable for indoor or office use only. Keep the power supply away from humidity! 2. Specifications 2.
2.2 Temperature range and humidity Operation 0 to +50 °C 20 – 90% rel. humidity, non-condensing Storage -20 to +70 °C 5 – 95% rel. humidity, 2.3 Temperature range and humidity This PSU works with 100 to 240 V (47/63 Hz) and is equipped with the following protection functions: 1. Surge protection: The PSU unit has a large surge protector, which is active in the following voltages: 2.
3.
4. The modular system of the PSU A special feature for the connection of peripheral devices is the so-called cable management. Thanks to this modular system only the really required cables need to be connected thus keeping the case tidy and optimizing the airflow within. 4.1 The terminals on the PSU (A) 2x 6+2-pin terminals for PCIe connectors (red) (B) 4x 6-pin terminals for SATA and peripheral device connectors (black) A B 4.
4.
5. Installation Remove the previously installed PSU from the case. Proceed as follows: 1. 2. 3. 4. Switch off your PC. Disconnect the PSU’s power cord from the wall outlet and your PSU. Unplug all cables connected to the PC case (e.g. keyboard, mouse, etc.) Open the PC case (for additional information refer to the PC case’s manual) Disconnect all cable connections between the PSU and other PC components (e.g. mainboard, HDDs, drives, fans, etc.).
2. In case the mainboard also provides an additional 4-pin or 4+4-pin power connector (the so-called P4 resp. P8 connector), also plug the respective connector (fig. 2). fig. 2 Note: The power connection of the mainboard depends on the vendor and may vary. For detailed information on how to establish the power connector refer to your mainboard’s manual. 3. In case your PCIe graphics card is equipped with an additional power connector, also plug the 6-pin (fig. 3a) or (fig.
5.3 Connecting optical drives and other peripheral devices 1. Connect the 4-pin plug (fig. 4), the SATA plug (fig. 5) and the 4-pin floppy plug (fig. 6) to the respective peripheral devices. fig. 4 fig. 5 fig. 6 Note: The power connection of the mainboard depends on the vendor and may vary. For detailed information on how to establish the power connector refer to your mainboard’s manual.
5.4 Connecting the cables to the PSU Connect the modular cables to the PSU according to the connector coding (see above fig. 4). 5.5 Checking all connections Make sure that all devices are connected properly then plug the PSU’s power cord to a wall outlet and switch the power supply on. This ends the installation of the PSU. On/Off switch of the power supply 6. Troubleshooting If the PSU does not work properly, check the following: 1.
Legal disclaimer As part of SHARKOON continued policy of product improvement, product design and specifications are subject to change without notice. The specifications may vary in different countries. All rights reserved, especially (also partly) the translation, reprinting, reproduction by copying or similar methods. Offenders will be liable for damages. All rights reserved, including the granting of patents or registration. Subject to availability and technical modifications.
