MODULAR ATX 2.
Content 1. Features 3 2. Specifications 4 2.1 Overview 4 2.2 Temperature range and humidity 5 2.3 Mains voltage and protective functions 5 2.4 Safety standards 5 2.5 Warranty period 5 3. Parts and accessories 6 4. The modular system of the PSU 7 4.1 The connectors at the PSU 7 4.2 The modular cables 7 5. Installation 8 5.1 Installing the PSU into a PC case 8 5.2 Connecting the PC components to the PSU 8 5.2.1 The connectors at a glance 8 5.2.
Dear customer! Congratulations for purchasing one premium quality SHARKOON product. For a long life time and to take full advantage of this product we recommend that you read this manual completely. Have a good time with our product! SHARKOON Technologies 1. Features ATX 12 V v.2.0: Supports the latest Intel and AMD processor based systems. High energy efficiency: This power supply achieves an energy efficiency higher than 80%. This value indicates the ratio (in percent) between energy input and output.
WARNING To prevent the risk of electric shock, do not open power supply housing. No user-exchangeable parts inside. Refer service and maintenance to authorized Sharkoon personnel. Warranty is void under unauthorized attempt to open the power supply housing. Suitable for indoor or office use only. Keep the power supply away from humidity! 2. Specifications 2.
2.2 Temperature range and humidity Operation 0 to +50 °C 20 – 90% rel. humidity, non-condensing Storage -20 to +70 °C 5 – 95% rel. humidity, non-condensing 2.3 Line voltage and protective functions This PSU works with 100 to 240 V (47/63 Hz) and is equipped with the following protective functions: 1. Over voltage protection: The power supply provides a latch mode against over voltage, as defined below: 2.
3. Parts and accessories A B C a b c D e A – B – C – D – E – Power supply ”WPM400” or ”WPM500” or ”WPM600” Power cord Set with modular cables: a – 1x PCIe cable with 1x 6-pin connector b – 1x cable with 5x 4-pin peripheral connectors and 1x Floppy connector c – 2x SATA cables with 3x 15-pin connectors each Set with mounting screws Cable bag Note: If you are missing any of the items listed above, please contact our customer service immediately: support@sharkoon.
4. The modular system of the PSU The special feature of this PSUs is the so called cable management system to connect the peripheral devices. Thanks to this modular system only the really required cables need to be connected thus keeping your case proper and optimizing the airflow within. 4.1 The connectors at the PSU A B A – 3x 6-pin connector for SATA and peripheral cables (black) B – 1x 6-pin connector for PCIe cables (red) 4.
5. Installation Remove an already installed PSU from the case. Proceed as follows: 1. Switch off your PC. Disconnect the PSU’s power cord from the wall outlet and your PSU. Unplug all cables connected to the PC case (e.g. keyboard, mouse etc.). 2. Open the PC case (for additional information refer to the PC case’s manual). 3. Disconnect all cable connections between the PSU and other PC components (e.g mainboard, HDDs, drives, fans etc.). 4.
Note: All connectors are designed fault-preventing to avoid misconnection. If you cannot attach the female connector to the male connector of the drive or peripheral, please check if both connectors are attached in the correct orientation. Do not force to plug the female connector into the male connector in wrong orientation, nor modify any of the components, as this will damage the PSU and your hardware. SHARKOON warranty does not cover damage caused by incorrect handling. 5.2.
3. In case your PCIe graphics card is equipped with an additional power connector, also plug the 6-pin (fig. 3a) or 6+2-pin (fig. 3b) PCIe power connector which will provide a stable power support for your graphics card. fig. 3a fig. 3b 5.2.3 Connecting optical drives and other peripheral devices 1. Connect the 4-pin plug (fig. 4), the SATA plug (fig. 5) and the 4-pin floppy plug (fig. 6) to the respective peripheral devices. fig. 4 fig. 5 fig.
6. Troubleshooting In case the power supply does not work properly, check the following topics: 1. 2. 3. 4. 5. 6. Is the power cord correctly connected to a wall outlet and the PSU’s power connector? Make sure the on/off switch is turned to the “I” position. Check if the main power connector is correctly plugged to the mainboard. Check if the power connectors are properly connected to the peripheral devices in case the short circuit protection function was activated when switching on the PSU.
4-pin power connector for peripherals + 4-pin power connector for floppy SATA power connectors WPM SERIES 12
Legal disclaimer: As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.
