Handbuch Manual Manuel d‘utilisation Guia usario Manuale d´istruzioni Gebruiksaanwijzing Guia usário Instukcja obstugi 매뉴얼 ユーザー 使用手冊 マニュアル
Content 1. Features 1.1 X-Tatic Digital 1.2 X-Tatic Sound Control Unit (SCU) 2. Specifications 2.1 X-Tatic Digital 2.2 X-Tatic SCU 3. Compatibility 3.1 X-Tatic Digital 3.2 X-Tatic SCU 4. Parts and accessories 4.1 X-Tatic Digital 4.2 X-Tatic SCU 5. The headset at a glance 5.1 The volume controller 5.2 The connectors 5.3 Connecting the microphone to the headset 6. The SCU at a glance 6.
Dear customer! Congratulations for purchasing one premium quality SHARKOON product. For a long life time and to take full advantage of this product we recommend that you read this manual completely. Have a good time with our product! SHARKOON Technologies GmbH 1. Features 1.1 X-Tatic Digital • • • • • • 5.
3. Compatibility 3.1 X-Tatic Digital • PC / MAC / other sources: analogue input (via cable adapter) 3.2 X-Tatic SCU • • • • Xbox / Xbox 360: optical input PS2 / PS3: optical input / USB microphone connection PC / MAC: optical input / analogue or USB microphone input DVD / other sources: optical input 4. Parts and accessories 4.1 X-Tatic Digital A B D • • • • • C X-Tatic Digital 5.1 headset (A) Microphone (B) Cable adapter (9-pin analogue plug > 4 x 3.5 mm / C) Power supply incl.
4.2 X-Tatic SCU B A C • • • • D X-Tatic Sound Control Unit (A) USB microphone cable for PS3 and PC (B) Microphone connection cable for Xbox 360 (3.5 mm jack > 2.5 mm jack / C) Optical connection cable (S/PDIF / D) Note: If you are missing any of the items listed above, please contact customer service via e-mail at support@sharkoon.
5.
5.1 The volume controller C A A B C D C B E D A – B – C – D – (E – Volume adjustment for each channel after pressing the according button (button illuminated) or main volume adjustment respectively (all buttons illuminated) as well as volume on/off (by pressing this controller) Microphone volume (only Xbox 360) Control button for the front, rear and center speaker as well as for the subwoofer (Sub). The volume level is displayed by different colors.
5.2 The connectors A A a – a b Headset connectors – 9-pin analog connector – ISO power connector b B – a b B a b 1 2 3 4 Cable adapter – 9-pin analog jack – 3.5 mm stereo plug for each channel: 1 – Microphone connector (pink) 2 – Subwoofer connector (orange) 3 – Connector for rear speakers (black) 4 – Connector for front speakers (green) 5.3 Connecting the microphone to the headset 1. Insert the microphone’s 3.5 mm stereo plug (fig.
2. Turn the microphone until the indications on the microphone and on the headset are opposite to each other (fig. 3). fig. 3 3. Press the microphone’s plug into the headset’s jack completely and turn the microphone to the front and into the desired position. 6. The SCU at a glance A C A B a c C A – B – C – b d Analogue audio outputs (3x 3.
B A A B C D E A – B – C – D – E – F – G – H – F G H Optical audio input (S/PDIF) USB connector (for PS3 microphone) Buttons for volume (- / +) resp. Time-Delay (- / +) On / off button for Pro Logic resp. Dynamic Range Control (DRC) SCU power on / off button Switch between Time-Delay for surround and center speaker Switch between volume / Pro Logic (VOL / PL) and Time-Delay / Range Control (TD / DRC) ISO power connector 6.
6.1.1 Volume / Dolby Pro Logic (VOL / PL) Dolby Pro Logic is a Dolby technology which enables the transformation of a 2-channel signal into a 5.1-channel signal. 1. Toggle the switch (fig. 1 / A) into the “VOL / PL” position. 2. Activate / deactivate the Dolby Pro Logic function with the respective button (fig. 1 / B). 3. Adjust the volume using the buttons “Vol -” and “Vol +” (fig. 1 / C). C B A fig. 1 6.1.
6.2 Restore the factory default / reset To restore the factory settings press and hold the buttons “Vol -” and “Vol +” (fig. 3 / A) simultaneously while the SCU is switched off then press the power button (fig.3 / B). The LED display (fig. 4) will flash 3 times to confirm the successful reset. A B fig. 3 fig. 4 7. Using the X-Tatic Digital with a PC (optical output) 1.
8. Using the X-Tatic Digital with the Xbox / Xbox 360 1. Connect the optical cable (remove protective caps!) to the optical audio output of your Xbox / Xbox 360 and the SCU’s optical audio input. 2. Connect the X-Tatic to the SCU by plugging the headset cable’s 9-pin connector to the SCU’s 9-pin plug. 3. Connect the microphone cable for Xbox 360 to the respective microphone input on the X-Tatic’s volume controller and the controller of the game pad. 4.
7. Under “Settings” > “Audio Device Settings” define “C-Media USB Audio Device” as input device and “C-Media USB Audio Device” as output device. Note: From the PS2’s settings menu select Dolby Digital 5.1 as output format. 10. Connecting the headset to a PC or any other source (analog) 1. Connect the included power supply to a wall outlet and the straight power plug to the headset’s ISO power connector. 2. Connect the cable adapter’s 9-pin connector to the according connector of the headset cable. 3.
12. Important notes The X-Tatic Analog, the X-Tatic Digital and the X-Tatic Sound Control Unit are not compatible to the X-Tatic Revision I, the X-Tatic Revision II and the respective control boxes! To avoid damages do not use the older versions with the new one and vice versa. Avoid listening at a high volume level for a longer period of time. Doing so may harm your hearing.