Manual for use with
Package contents E F G H I X-Tatic S7 Sound Control Unit (SCU) Detachable microphone Optical connection cable (S/PDIF) Microphone connection cable for Xbox® 360 (3.5 mm jack > 2.5 mm jack) USB2.0 Y cable (2x type A > type B) Stereo connection cable (3.5 mm jack > 3.5 mm jack) Stereo extension cable (3.5 mm plug > 3.5 mm jack) G6 adapter cable (G6 > USB2.0 A and 2x 3.
Basic information USB connector (for power and PS3™/PC microphone) Optical audio input (S/PDIF) Switch between optical and analog input Analog audio input ON/OFF switch for 3D stereo function SCU power on/off button Volume + Volume Dolby® Headphone button X-Tatic S7 headphone connector (G6) Analog output for speakers or non S7 headset (3.
Cabling Required parts for PC with SCU Always connect the main USB connector of the USB2.0 Y cable! In case a single USB port of the connected device does not provide sufficient power, please also connect the supplementary USB connector of the USB2.0 Y cable. Sound Control Unit (SCU) M MV USB2.
Cabling Required parts for PC G6 adapter cable (G6 > USB2.0 A and 2x 3.5 mm connectors) MVM without SCU In case the USB port of your notebook does not provide sufficient power, please switch off the amplifier function.
Required parts for PC Cabling with other stereo headsets Sound Control Unit (SCU) USB2.0 Y cable (2x type A > type B) Optical connection cable (S/PDIF) Remove the protective caps! Stereo extension cable (3.5 mm plug > 3.
SCU settings SCU LED indications Dolby® Digital 5.
PC sound settings Choose SPDIF out as Standard Output Device. If available, set “Dolby® Digital Live 5.1” as output format. Inside your system's sound settings define the USB microphone as input device. Please pay attention to the microphone level, as this level may be set to zero by default under Windows 7.
