Handbuch Manual Manuel d‘utilisation Guia usario Manuale d´istruzioni Gebruiksaanwijzing Guia usário Instukcja obstugi 88 X-TATIC SOUND CONTROL UNIT
Content 1. Features X-Tatic Sound Control Unit (SCU) 18 2. Specifications X-Tatic SCU 18 3. Compatibility X-Tatic SCU 18 4. Parts and accessories 5. The SCU at a glance 20 19 6. Sound settings / sound technologies 22 6.1 Volume / Dolby Pro Logic (VOL / PL) 22 6.2 TD / DRC 23 6.2.1 TD (Time-Delay) 23 6.2.2 DRC (Dynamic Range Control) 23 6.2.3 Activating TD / DRC 24 6.
Dear customer! Congratulations for purchasing one premium quality SHARKOON product. For a long life time and to take full advantage of this product we recommend that you read this manual completely. ENGLISH Have a good time with our product! SHARKOON Technologies GmbH 1. Features X-Tatic Sound Control Unit (SCU) • • • Supports Dolby Digital 2.0, Dolby Digital 5.1 and Dolby Pro Logic Supports the chat function of PS3, Xbox and Xbox 360 Dynamic Range Control 2.
. Parts and accessories A B ENGLISH C D • • • • • • E X-Tatic Sound Control Unit (A) USB microphone cable for PS3 and PC (B) Power adapter (C) Microphone connection cable for Xbox 360 (2.5 mm jack > 2.5 mm jack / D) Optical connection cable (S/PDIF / E) Manual Note: If you are missing any of the items listed above, please contact customer service via e-mail at support@sharkoon.
. The SCU at a glance ENGLISH A B C A a c A – B – C – b d Analogue audio outputs (3x 3.
ENGLISH B C A – B – C – D – E – F – G – H – D E F G A H Optical audio input (S/PDIF) USB connector (for PS3 microphone) Buttons for volume (- / +) resp. Time-Delay (- / +) On / off button for Pro Logic resp.
6. Sound settings / sound technologies Source Output / Function Dolby Digital 5.1 DRC Stereo yes yes no no Dolby Digital 2.0 no yes no no Dolby Pro Logic no yes no no Dolby Digital 5.1 no no yes yes ENGLISH Stereo Dolby Pro Logic Note: It may take several seconds to recognize the signal and to display the current sound mode via LED. 6.1 Volume / Dolby Pro Logic (VOL / PL) Dolby Pro Logic is a Dolby technology which enables the transformation of a 2-channel signal into a 5.
1. 2. 3. Toggle the switch (fig. 1 / A) into the “VOL / PL” position. Activate / deactivate the Dolby Pro Logic function with the respective button (fig. 1 / B). Adjust the volume using the buttons “Vol -” and “Vol +” (fig. 1 / C). B ENGLISH C A fig. 1 6.2 TD / DRC 6.2.1 TD (Time-Delay) The Time-Delay function allows to define a time delay for the sound reproduction of each speaker. Thus a spacious playback of the audio signal can be achieved.
6.2.3 Activating TD / DRC 1. 2. C D B A fig. 2 The Sound Control Unit will keep all settings after shutdown. Changes to the Time-Delay settings in Dolby Digital 5.1 mode will affect the settings in Dolby Pro Logic mode and vice versa. X-TATIC SOUND CONTROL UNIT 24 ENGLISH 3. Toggle the switch (fig. 2 / A) to the “TD / DRC” position. Select the desired channel (center / surround) you wish to adjust using the TD function switch (fig. 2 / B). Pressing the buttons “TD -” or “TD +” (fig.
6.3 Restore the factory default / reset To restore the factory settings press and hold the buttons “Vol -” and “Vol +” (fig. 3 / A) simultaneously while the SCU is switched off then press the power button (fig.3 / B). The LED display will flash 3 times to confirm the successful reset. ENGLISH A B fig. 3 fig. 4 7. Using the SCU with a PC 1. 2. 3. 4. 5. Connect the included power supply to a wall outlet and the SCU’s ISO power connector.
6. 7. Alternatively connect the single 3.5 mm jacks of any 5.1 headset to the SCU’s according analog plugs (instead of the USB microphone cable the microphone is directly connected to the soundcard). For a better distinction the connectors are color coded. Switch on the SCU and boot up your PC. 8. Using the SCU with the Xbox / Xbox 360 1. 2. 3. 4. 5. 6. 7. Connect the included power supply to a wall outlet and the SCU’s ISO power connector.
9. Using the SCU with the PS2 / PS3 1. 2. 4. 5. 6. 7. 8. Note: From the PS2’s settings menu select Dolby Digital 5.1 as output format. X-TATIC SOUND CONTROL UNIT 27 ENGLISH 3. Connect the included power supply to a wall outlet and the SCU’s ISO power connector. Connect the optical cable (remove protective caps!) to the optical audio output of your PS2 / PS3 and the SCU’s optical audio input.
Attention: Xbox, Xbox 360, Xbox Advanced AV Pack, Xbox Communicator, Xbox Live and the respective images/logos are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Dolby, Pro Logic, the double-D symbol and the respective images/logos are registered trademarks or trademarks of Dolby Laboratories. All named products and descriptions are trademarks and / or registered trademarks of the respective manufacturers and are accepted as protected.
