Automobile Accessories - Utility Rack User Manual

ManualsBrandsSharkRack ManualsSpeaker SystemT3-R19-H

Proprietary Information of SharkRack, Inc.

32920 Alvarado Niles Road Ste 250, Union City, CA 94587

510-477-7900• 510-324-1664 • www.sharkrack.com

SHP900096-000 04/13/05 Rev 2 Page 1 of 5

T3 Rack Mount Kit

Installation Instructions

for the Sun Microsystems StorEdge T3 Array

T3-R19-H

Kit Contents

List # Part # Part Name Quantity Detail

1 SH03001 Rear Mounting Bracket 2

2 SH03002 Right Front Mounting Bracket 1

3 SH03003 Left Front Mounting Bracket 1

4 SH03004 Back Plate 2

Summary of content (5 pages)

PAGE 1
T3 Rack Mount Kit Installation Instructions for the Sun Microsystems StorEdge T3 Array T3-R19-H Kit Contents List # Part # Part Name Quantity 1 SH03001 Rear Mounting Bracket 2 2 SH03002 Right Front Mounting Bracket 1 3 SH03003 Left Front Mounting Bracket 1 4 SH03004 Back Plate 2 SHP900096-000 Detail 04/13/05 Rev 2 Proprietary Information of SharkRack, Inc. 32920 Alvarado Niles Road Ste 250, Union City, CA 94587 510-477-7900• 510-324-1664 • www.sharkrack.
PAGE 2
T3 Rack Mount Kit Installation Instructions List # Part # Part Name Quantity 5 SH03005 Left Chassis Mount 1 6 SH03006 Right Chassis Mount 1 7 SH03007 Hardware Packet 1 Detail • 8-32 x 3/8” Flathead Screw (9) • 10-32 x 1/4” Flathead Screw (5) • 10-32 x 1/2” Panhead Screw (14) Note: The T3 hardware packet contains some extra screws and nuts.
PAGE 3
T3 Rack Mount Kit Installation Instructions Installation Instructions Step Detail 1. Measure the distance from the front rack rail to the rear rack rail. Distance = _________ 2. Assemble the left front mounting bracket, rear mounting bracket, and back plate in the order as shown. Set the front and rear mounting brackets at the distance measured in step 1. 3. Secure the left front mounting bracket and rear mounting bracket to the back plate using four 8-32 x 3/8-inch flat head screws.
PAGE 4
T3 Rack Mount Kit Installation Instructions Step Detail 8. Remove the feet from the bottom of the StorEdge T3 array. 9. Install the left mounting chassis on the bottom left side of the T3 array and secure with two 10-32 x 1/4-inch flat head screws. 10. Install the right mounting chassis on the bottom right side of the T3 array and secure with two 10-32 x 1/4-inch flat head screws. 11. Install the T3 array in the rack enclosure.
PAGE 5
T3 Rack Mount Kit Installation Instructions Warranty LIMITED WARRANTY AND WARRANTY DISCLAIMER - Seller warrants that the System will be free from defects in materials and workmanship for a period of one (1) year from date of delivery to customer premises. Seller’s sole liability and Customer’s sole and exclusive remedy for any breach of this warranty is, at Seller’s option and expense, to repair or replace any defective System that is returned to it by Customer.