User Manual

10
(1) Press the Remote’s
MENU button to access
the MENU screen.
(2) Press + or – button to
move the “ :” mark to
“CLOSED CAPTION”.
(3) Press the SET button.
(4) Press + or – button to
move the “ :” mark to
either “MODE” or “DATA”,
then press the SET
button.
Watching A TV Program (Continued)
(5) Press + or – button to
change the “CLOSED
CAPTION” setting.
(6) Press the SET button.
(7) Press the MENU button to
exit.
Note:
• When receiving closed caption signals, a white line may
appear in place of the captions. This is due to poor signal
conditions or problems at the broadcast source, and does
not indicate a problem with your TV.
• When viewing in TEXT mode, if no TEXT broadcast is being
received the screen may become dark and blank. Should
this occur, set the Closed Caption mode to “OFF”.
• If a TV program has Closed Caption and the MUTE button
is pressed, the set enters Closed Caption mode auto-
matically. Pressing MUTE again will return the set to its
previous condition.
• If any button is pressed to call up the ON SCREEN
DISPLAY while viewing a CLOSED CAPTION broadcast,
the closed captions will disappear momentarily.
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
CLOSED CAPTION
MODE
DATA
CAPTION
CH2
MODE :
DATA :
CAPTION
TEXT
OFF
CH 1
CH 2
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
MENU
TIMER
VIDEO ADJUST
CLOSED CAPTION
FUNCTION
CLOCK
LANGUAGE
CH SETTING
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
MENU
TIMER
VIDEO ADJUST
CLOSED CAPTION
FUNCTION
CLOCK
LANGUAGE
CH SETTING
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
CLOSED CAPTION
MODE
DATA
CAPTION
CH2
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
CLOSED CAPTION
MODE
DATA
CAPTION
CH2
# PRESETTING THE CHANNELS
L EZ SETUP
By operating the channel preset functions, you can preset
your TV to the desired channels for viewing.
(1) Press the Remote’s
MENU button to access the
MENU mode.
(2) Press + or – button to
move the “ :” mark to the
“CH SETTING” mode.
(3) Press the SET button on
the Remote Control to
access CH SETTING mode.
(4) Press the + or – button on
the Remote Control to
move the “ :” to “EZ
SETUP” mode.
(5) Press the SET button on
the Remote Control to
access EZ SETUP mode.
(6) Press the SET button.
The tuner will automatically
search for the broadcasting
and cable TV channels.
(The CH No. will automatically
increase when it appears.)
To cancel EZ SETUP. Press
SET button on the Remote
Control.
(7) Once EZ SETUP is
completed, the smallest
channel number memo-
rized will be displayed.
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
MENU
TIMER
VIDEO ADJUST
CLOSED CAPTION
FUNCTION
CLOCK
LANGUAGE
CH SETTING
CH SETTING
EZ SETUP
AIR/CABLE
CH SEARCH
CH MEMORY
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
CONNECT ANTENNA
OR CABLE.
START EZ SETUP?
NO MENU
YES SET
PLEASE WAIT
AIR 2
AUTO PROGRAMMING
STOP SET
2
AIR
(CH SETTING mode)
(EZ SETUP mode)
DPSS
TV • VCR COMBINATION
+
SET
PROG
MENU
TIMER
ON/OFF
CONFIRM
–
ed
RETURN
MENU button
+/– button
SET button
RETURN button
08-11 13VT-CR10[E].pm65e 15/5/01, 7:24 pm10