User Manual

15
L INSERTING A VIDEO CASSETTE
Gently insert the video cassette into the cassette compartment
(use only
video cassettes). The product will turn on
automatically.
If the video cassette is inserted incorrectly, the loading system
will not function.
Do not force the cassette.
L EJECTING THE CASSETTE TAPE
• Pressing the STOP/EJECT button on the TV/VCR set ejects
the cassette tape. (When the TV/VCR set is in operation, press
the STOP/EJECT button twice.)
Note:
• If the set is tilted, the cassette may not load or eject properly.
L PLAYBACK
• With a cassette loaded, press the PLAY button. The on-screen
display will appear showing the tape operation.
• To stop playback, press the STOP button.
Note:
• TAPE speed (SP, LP, EP) is selected automatically for proper
playback.
Cassette Tape
The label side
should face
outwards
The reel hub sockets
should face downwards
7 8 9
0 100
TAPE
SPEED
REC
REW FF
PLAY
STOP
PAUSE/STILL
COUNTER
RESET
DPSS
FLASHBACK
TAMPER
PROOF
TV • VCR COMBINATION
+
SET
PROG
MENU
TIMER
ON/OFF
CONFIRM
–
ed
e
TR
•
•
•
•
d
RETURN
CH
MENU button
RETURN button SET button
TAMPER
PROOF button
TAPE SPEED
button
FF button
PAUSE/STILL
button
REW button
PLAY button
STOP button
(On the Set)
REW (Reverse Video
Search) button
STOP/EJECT
button
FF (Forward Video
Search) button
PLAY
button
PLAY
SP
0:00:00 10:20AM OCT.15
L AUTOMATIC TRACKING CONTROL SYSTEM
• The Automatic Tracking Control System adjusts the tracking
to its optimum setting when playback begins after inserting
the tape. (“TRACKING” will flash on the TV screen during
automatic tracking adjustment.)
• The Automatic Tracking Control System will readjust the
tracking during Playback mode if the recording speed changes
or at the boundary between sections recorded on different
VCRs.
• If noise should remain on the TV screen after the track
adjustment has been completed by the Automatic Tracking
Control System, use the Manual Tracking mode.
• To adjust Manual Tracking, press the TR e or d button on the
Remote Control during Playback mode until the noise is
minimized or eliminated.
• To return to Auto Tracking mode, press both the TR e and d
buttons at the same time.
Note:
• A small mechanical noise may be heard when a cassette is
loaded in the VCR and no tape operation button is pressed.
This is normal. The unit is ready to immediately start playback
when the PLAY button is pressed.
If no key is pressed within 5 minutes, the VCR will return to
the normal Standby mode and the mechanical noise will stop.
• If noise should remain on the TV screen or vertical movement
appears during the Playback mode, Video Search mode or
Still Picture mode even after the Automatic Tracking
adjustment, use the Manual Tracking mode.
L FULL AUTOMATIC PLAYBACK FUNCTION
The Full Automatic Playback Function enables you to enjoy
playback with ease.
• When you insert a cassette with the erasure protection tab
removed, the VCR automatically turns on and plays back the
tape. When the tape reaches its end, the VCR automatically
rewinds the tape and ejects it.
Note:
• If the erasure protection tab is in place, press the PLAY button
after the cassette is loaded.
PLAY
SP
TRACKING
0:00:00 10:20AM OCT.15
(On the TV Screen)
Normal Picture Poor Tracking
Playing A Cassette (Continued)
12-15 13VT-CR10[E].pm65e 15/5/01, 7:24 pm15