User Manual

18
RECORDING WITH THE TIMER
The timer has 5 program positions, which allow 5 programs to
be set for automatic recording over a one month period. Each
of the programs can be set to record on a daily or weekly
basis until the tape reaches its end.
Setting The Program Timer
Example:
To set the program in channel 10 from 4:30 p.m.
to 6:30 p.m. every Friday for automatic recording in SP mode.
(1) Load a cassette with the
erasure protection tab in
place.
(2) Press the PROG button
on the Remote Control. (If
the time is not set at this
stage, the On-screen display
will show the CLOCK SET
menu. See page 12.)
When the Clock is not set,
select “AUTO CLOCK OFF”.
Then set the clock manually.
(3) Press the + or – button on
the Remote Control to
select the Program mode
you wish to use, then
press the SET button.
(4) Press the + or – button on
the Remote Control to
select the channel number,
then press the SET button.
Recording With The Timer
TAPE
SPEED
REC
REW FF
PLAY
STOP
PAUSE/STILL
COUNTER
RESET
DPSS
TAMPER
PROOF
TV • VCR COMBINATION
+
SET
PROG
MENU
TIMER
ON/OFF
CONFIRM
–
ed
RETURN
MENU
button
+/– button
SET
button
RETURN button
TAPE
SPEED
button
PROG
button
CONFIRM button
TIMER ON/OFF button
(5) Press the + or – button on
the Remote Control to
select the starting time
“hour”, then press the SET
button.
(6) Press the + or – button on
the Remote Control to
select the starting time
“minutes”, then press the
SET button.
(7) Press the + or – button on
the Remote Control to
select the stop time
“hour”, then press the SET
button.
(8) Press the + or – button on
the Remote Control to
select the stop time
“minutes”, then press the
SET button.
(9) Press the + or – button on
the Remote Control to
select the “Tape Speed”
(SP or EP), then press the
SET button.
(10) Press the + or – button on
the Remote Control to
select “COMPLETE”, then
press the SET button. The
REC TIMER is now on
and the Program Timer
indicator will light up.
• To continue any additional program setting, press the + or
– button on the Remote Control to select the “NEXT” and
press the SET button. Then repeat the steps (3) through
(10) above.
• To make a correction to the current program, press the
Remote’s + or – button to select “CHANGE” and press
the + or – button to select program number, then press
the SET button. Next, repeat steps (3) through (10).
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
OCT.15
12
--:----
--:----
SP
10:20AM OCT.15(FRI)
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
FRI
12
--:----
--:----
SP
10:20AM OCT.15(FRI)
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
FRI
10
--:----
--:----
SP
10:20AM OCT.15(FRI)
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
OCT.15 OCT.16 ~ NOV.13 NOV.14 DAILY
MON - SAT MON - FRI SAT FRI ~ MON SUN
+ button;
OCT.15 OCT.16 ~ NOV.13 NOV.14 DAILY
MON - SAT MON - FRI SAT FRI ~ MON SUN
–
button;
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
FRI
10
4:20PM
--:----
SP
10:20AM OCT.15(FRI)
SELECT + / – : SET SET
PREVIOUS RETURN : QUIT MENU
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
FRI
10
4:30PM
--:----
SP
10:20AM OCT.15(FRI)
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
FRI
10
4:30PM
6:30PM
SP
10:20AM OCT.15(FRI)
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
FRI
10
4:30PM
6:30PM
SP
10:20AM OCT.15(FRI)
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
REC RESERVATION-1
MODE
CH
START
STOP
SPEED
FRI
10
4:30PM
6:30PM
SP
10:20AM OCT.15(FRI)
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
REC TIMER PROGRAM
10:20AM OCT.15(FRI)
MODE CH START STOP
1 FRI 10 4:30
PM 6:30 PM SP
2
3
4
5
COMPLETE NEXT CHANGE DELETE
SELECT + / — : SET SET
PREVIOUS RETURN : QUIT MENU
16-19 13VT-CR10[E].pm65e 15/5/01, 7:25 pm18