User Manual

‰ 12
ENGLISH
Picture Adjustment
Adjusting the Picture
• TINT can only be selected and adjusted when receiving NTSC broadcasts. (AV only)
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
! Press the PICTURE button to
enter Picture Adjustment
mode.
@ Each time you press the
PICTURE button, the mode
changes as shown on the right.
# Press the VOLUME UP (
) or
DOWN (
) button.
TV/VIDEO
TV
0
NORMAL
TIMERFUNCTION
SYSTEM
PICTURE
1
4
7
2
5
8
3
6
9
CH
CH
#
!,@
(TV set)
!,@
#
(Example)
Press the
NORMAL button
←
TINT is displayed only for NTSC and
is not displayed for PAL or SECAM.
• When the NORMAL button is
pressed while a PICTURE
selection is displayed on the
screen, only the selected mode
on the screen is reset to the
standard (factory setting)
position.
• When the NORMAL button is
pressed during NORMAL-
MODE, all PICTURE
selections are reset to the
standard (factory setting)
positions.
H PICTURE menu screen
The following table lists the adjustment items shown in the PICTURE menu screen and how they
change as you press the VOLUME UP (
) or DOWN ( ) button.
Selected item Press the ( ) button Press the ( ) button
CONTRAST To decrease To increase
contrast contrast
COLOUR For less colour For more colour
intensity intensity
SHARPNESS For less For more
sharpness sharpness
BRIGHTNESS For less For more
brightness brightness
TINT To move tint To move tint toward
toward purple green