User Manual

16
AI /CABLER
EZ SE PTU
CH SEARCH
CH MEMORY
2
AR +T:
TO –P:
AIR
CH SEARCH
ST
S
1
AI /CABLER
EZ SE PTU
CH SEARCH
CH MEMORY
Set Up (Continued)
→
(START)
(STOP)
or
L Saving broadcast TV channels into memory.
1.1 Press
MENU to access MAIN MENU
screen, then press
CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “SET UP”.
1.2 Press
VOL (+) or (–) to access SET UP
mode, then press
CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “CH
SETTING”.
1.3 Press
VOL (+) or (–) to access CH
SETTING mode.
1.4 Press
CH UP ( 8 ) or DOWN ( 9 ) to move
the “
” mark to “CH SEARCH”, then press
VOL (+) or (–) to access CH SEARCH
mode.
START
2.1 Press
VOL (+) . The tuner will search
through all available channels in your area
and add them into the TV’s memory.
STOP
2.2 Press
VOL (–) . CH SEARCH will stop at
the current channel and will not add any
higher channels.
2.3 Press
MENU to exit.
Note:
L Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press
MENU to access MAIN MENU
screen, then press
CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “SET UP”.
1.2 Press
VOL (+) or (–) to access SET UP
mode, then press
CH UP ( 8 ) or DOWN
(
9 ) to move the “ ” mark to “CH
SETTING”.
1.3 Press
VOL (+) or (–) to access CH
SETTING mode, then press
CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “CH
MEMORY”.
2.1 Press VOL (+) or (–) to access CH
MEMORY.
2.2 Use
CH UP ( 8 ) or DOWN ( 9 ) or REMOTE
KEYPAD
to select each desired channel
to add or erase.
2.3 Press
VOL (+) to add a channel to the TV’s
memory or press
VOL (–) to erase a
channel from the TV’s memory.
(CH SETTING mode)
(CH SETTING mode)
→
→
→
(CH SEARCH mode)
→
→
• If you press
VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
13-17 14MR10 [E].p65e 9/5/01, 7:14 PM16