COLOR TELEVISION MODEL 20F630 L OPERATION MANUAL L ® As an ENERGY STAR Partner, SHARP has determined that this product meets ® ® the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered trademark. CONTENTS PAGE • IMPORTANT INFORMATION/IMPORTANT SAFEGUARDS ................................................ 2 ~ 10 • Supplied Accessories ............................................ 11 • Before Operating Your Television ........................... 11 • Antenna Connections ...........
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television – built for outstanding quality, reliability and performance. Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL so that you may adjust the picture and color to your personal viewing preference.
IMPORTANT INFORMATION (Continued) WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. PRODUCT DISPOSAL This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder. Disposal of these materials may be regulated due to environment considerations.
IMPORTANT INFORMATION (Continued) 12. Follow all warnings and instructions marked on the television equipment. 13. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
(ESPAÑOL) Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro. IMPORTANTE Sírvase anotar el modelo del televisor y los números de serie en el espacio provisto, para ayudar a reportar en caso de pérdida o robo. Los números están ubicados en la parte posterior del televisor.
INFORMACIÓN IMPORTANTE (Continuación) ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad del usuario para utilizar este equipo. DESECHO DEL PRODUCTO Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo. El desecho de estos materiales deberá ser considerando regulaciones ambientales.
MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación) 12. Cumpla con todos los avisos y las instrucciones marcados en el televisor. 13. Si hay una antena exterior conectada al televisor, asegúrese de que el sistema de antena está conectado a tierra, para obtener así cierta protección contra la sobretensión y contra las cargas de electricidad estática acumulada. EJEMPLO DE CONEXIÓN A TIERRA DE UNA ANTENA SEGÚN CÓDIGO ELÉCTRICO NACIONAL.
(FRANÇAIS) Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure. IMPORTANT Afin de vous aider en cas de perte ou de vol, inscrivez les numéros de série et de modèle du téléviseur dans les espaces fournis à cet effet. Ces numéros sont situés à l’arrière du téléviseur.
INFORMATIONS IMPORTANTES (Suite) AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir de l’utilisateur sur le fonctionnement de cet équipement. MISE AU REBUT DU PRODUIT Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre. La mise au rebut de ces matières peut être réglementée pour des raisons environnementales.
PRÉCAUTIONS IMPORTANTES (Suite) 12. Respectez tous les avertissements et instructions mentionnés sur la télévision. 13. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques accumulées.
TV • CATV • VCR • DVD REC FWD ) L STOP PAUSE J REW ( : VOL + g SKIP f 9 VCR-CH 8 9 CH PLAY : MUTE VOL ; – MENU POWER (DVD/VCR) 9 D C CH 8 B A 6 PERSONAL PREFERENCE 3 100 8 ENTER 5 0 2 7 4 1 POWER FLASHBACK TV VCR INPUT DVD CATV DISPLAY Supplied Accessories Infrared Remote Control/Part Number RRMCGA108WJSA Dry batteries size “AA”/ 1.
Antenna Connections (Continued) OUTDOOR ANTENNA CONNECTION • Use one of the following two diagrams if you connect an outdoor antenna. A: Using a VHF/UHF combination outdoor antenna. B: Using separate VHF and/or UHF outdoor antenna. • Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set. B. Separate VHF/UHF Antenna A.
Quick Reference Control Operation L Location of Controls (ENGLISH) Front Panel POWER Press → On. Press again → Off. VIDEO IN 2 L-AUDIO-R SENSOR AREA FOR REMOTE CONTROL (INSIDE DOOR) MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. VOLUME UP/DOWN (+) Increases sound. (–) Decreases sound. CHANNEL UP/DOWN (8) Selects next higher channel. (9) Selects next lower channel. Basic Remote Control Functions POWER Press → On. Press again → Off.
Referencia rápida de los controles de operación L Ubicación de los controles (ESPAÑOL) Panel Delantero ALIMENTACION (POWER) Pulsando → Enciende (On). Pulsando nuevamente → Apaga (Off). ENTRADA VIDEO IN 2 I-AUDIO-D ZONA DEL SENSOR DEL MANDO A DISTANCIA (POR DENTRO DE LA PUERTA) MENU (MENU) Pulsando → Accede al MENU PRINCIPAL. Pulsando nuevamente → Sale del MENU PRINCIPAL. AUMENTO/DISMINUCION DEL VOLUMEN (VOL) (+) Aumenta el sonido. (–) Disminuye el sonido.
Référence rapide sur les commandes L Emplacement des touches (FRANÇAIS) Panneau Avant ALIMENTATION (POWER) Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension. ENTREE VIDEO IN 2 G-AUDIO-D ZONE DE DETECTION DU CAPTEUR (DERRIÉRE LE VOLET) RÈGLAGE (MENU) Appuyer → Accès au MENU PRINCIPAL. Appuyer de nouveau → Sortie du MENU PRINCIPAL. AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOL) (+) Pour augmenter le volume du son. (–) Pour diminuer le volume du son.
EZ SETUP during First Use L When you turn on the TV for the first time, it will automatically memorize the broadcast channels. Please perform the following instructions before pressing the POWER button. (1) Insert the batteries into the remote control. (See page 11) (2) Connect the antenna cable to the TV set. (See page 11 ~ 12) (3) Plug in the AC POWER cord to the wall outlet.
Demo Mode • To quickly learn more about the TV set, press and hold for more than three seconds both CH UP (8) and DOWN (9) or MENU on the TV set. The TV set will go into DEMO mode and briefly explain the various features. • To cancel DEMO mode, again press and hold for more than three seconds both CH UP (8) and DOWN (9) or MENU on the TV set.
Language L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. L Setting the ON SCREEN DISPLAY Language. 1 Press MENU to access the MAIN MENU screen. MENU ME N U S L E E P T I ME R V I DEO AD J U S T AUD I O AD J US T AUD I O SE L EC T C L OS E D C A P T I ON P A R E N T A L CON T RO L CH S E T U P SE TUP (MAIN MENU screen) 2 Press CH UP (8) or DOWN (9) to move the “a” mark to “SETUP”. CH 8 9 CH 3 Press VOL (+) or (–) to access SETUP mode.
Sleep Timer L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120 minutes. 1 2 Press MENU to access the MAIN MENU screen. Press VOL (+) or (–) to access SLEEP TIMER mode. MENU → VOL ; – ME N U S L E E P T I ME R V I DEO AD J U S T AUD I O AD J US T AUD I O SE L EC T C L OS E D C A P T I ON P A R E N T A L CON T RO L CH S E T U P SE TUP : VOL + (MAIN MENU screen) 3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
Video Adjust Description of Adjustment Items Selected item PICTURE TINT COLOR BRIGHT SHARP COLOR TEMP. RESET 1 2 VOL UP (+) button VOLUME VOL DOWN (–) button (+)/(–) PERSONAL PREFERENCE A To increase contrast To decrease contrast To make skin tones greenish To make skin tones purplish To increase color intensity To decrease color intensity To increase brightness To decrease brightness To increase sharpness To decrease sharpness To choose a MH, HIGH, LOW or ML COLOR TONE.
Audio Adjust Selected item VOL UP (+) button VOL DOWN (–) button TREBLE To increase treble response To decrease treble response BASS To increase bass response To decrease bass response BALANCE To emphasize the right speaker’s volume To emphasize the left speaker’s volume RESET To return all adjustments to factory preset levels. 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “AUDIO ADJUST”.
Audio Select L MTS (Multichannel TV Sound) This circuit allows reception of stereo or bilingual TV sound. L INTERNAL SPEAKER SWITCH This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from external speakers by using the AUDIO OUTPUT JACKS on page 46. L FAO (Fixed Audio Output) This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the AUDIO OUTPUT JACKS on page 46. With FAO, the TV’s volume control is disabled.
Audio Select (Continued) L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available. • Stereo broadcasts Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound. • SAP broadcasts Television broadcast can be received with either MAIN or SAP sound. MAIN sound: The normal program soundtrack. (Monaural or stereo where available.) SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.) L If stereo sound is difficult to hear.
Closed Caption L HOW TO SET CLOSED CAPTION • Your TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subscript on your TV screen as shown on the right. • Not all the programs and videos will offer closed caption. Please look for the “ ” symbol to ensure that captions will be shown. • Closed Caption broadcast can be viewed in two modes: CAPTION and TEXT.
Parental Control (V-CHIP Operation) L V-CHIP • This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful. • Restriction of TV programs includes two characters that contain information about the program’s MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents.
Parental Control (V-CHIP Operation Continued) • TV-PARENTAL GUIDELINES (Example) AGE TV –Y TV –Y7 TV –G T V – PG TV– 1 4 T V – MA R E T U RN Example 1.1 : Age Based setting Go through all select ratings and select unblocked for “AGE”. This will automatically unblock everything. D – – – L – – – S – – – V – – – FV – – – – – – V : B L OC K Example 1.2 : Age Based setting For “TV-G” select “BLOCK” for “AGE”.
Parental Control (V-CHIP Operation Continued) L HOW TO SET V-CHIP 1 2 3 4 5 6 7 8 9 FLASHBACK ENTER 0 100 PERSONAL PREFERENCE A B CH 8 VOL ; – MENU [1] MPAA RATING 1 2 C Press MENU to access the MAIN MENU screen. Press CH UP ( 8 ) or DOWN ( 9 ) to move the “a” mark to “PARENTAL CONTROL”.
Parental Control (V-CHIP Operation Continued) [2] TV GUIDELINES 1 2 Repeat steps 1 to 3 of [1] MPAA RATING. Press VOL (+) or (–) to access V-CHIP BLOCK select mode, then press CH UP (8) or DOWN (9) to move the “a” mark to “TV GUIDELINES”.
Parental Control (V-CHIP Operation Continued) [3] ADDITIONAL MODE (DOWNLOAD) There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically. 1 2 Repeat steps 1 to 3 of [1] MPAA RATING. Press VOL (+) or (–) to access V-CHIP BLOCK select mode, then press CH UP (8) or DOWN (9) to move the “a” mark to “OPTION”. VOL ; – 3 : VOL + → V – CH I P CH 8 9 CH B L OC K MP A A T V GU I D E L I N E S OP T I O N SECRE T N o .
Parental Control (V-CHIP Operation Continued) • How to set Additional mode (Example) 1 2 Repeat steps 1 to 2 of [3] ADDITIONAL MODE. Press CH UP (8) or DOWN (9) to move the “a” mark to “Cdn. English Ratings”, then press VOL (+) or (–). CH 8 9 CH 3 → VOL ; – 9 CH Cdn . Cdn .
Parental Control (V-CHIP Operation Continued) L Turning On (Activating) the V-Chip Blocks 1 2 Repeat steps 1 to 3 of [1] MPAA RATING. Press VOL (+) or (–) to access V-CHIP BLOCK select mode, then press CH UP (8) or DOWN (9) to move the “a” mark to “SECRET No.”. VOL ; – 3 : VOL + CH 8 → 9 CH V – CH I P B L OC K MP A A T V GU I D E L I N E S OP T I O N SECRE T N o . : – – – – S T A TUS : OF F (V-CHIP BLOCK select mode) Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
Parental Control (V-CHIP Operation Continued) L To change the V-CHIP BLOCK setting. (Secret No. is registered.) 1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET No.” will be displayed. I N PU T – 2 Enter the 4-digit “INPUT SECRET No.” using the REMOTE KEYPAD and the V-CHIP select mode will be displayed. Repeat configuration of the V-CHIP BLOCK. 1 2 3 4 5 6 7 8 9 I N PU T S E CR E T – – No . – S E CR E T No . ∗ ∗ ∗ ∗ 0 L If you forget or need to change your Secret No.
Parental Control (VIEW TIMER) L VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration acquired while the TV is on.) • VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10 V I EW T I M E R hours) in 30 minutes intervals.
Parental Control (VIEW TIMER Continued) 9 MENU Press MENU to exit. Example • To restrict anybody from watching the TV for 5 hours, after watching the TV for 2 hours, your settings would look like this: • They can choose to watch the 2 hours of TV however they wish. For example, they could watch 1 hour of TV, turn TV off for 30 minutes, then turn TV on and watch the remaining 1 hour on the VIEWING TIMER. V I EW T I M E R V I EW I NG T I ME 2 H 0 0M T I ME 5 H 0 0M SECRE T N o .
Parental Control (VIEW TIMER Continued) 2 Press and hold both VOL (+) and CH UP (8) on the TV set simultaneously until the VIEW TIMER mode is displayed. Now you can cancel the VIEW TIMER settings or change the SECRET No. while “INPUT SECRET No.” is displayed. (On the Set) VOL (+)/CH UP (,) buttons L Notice of Remaining VIEWING TIME • For every 30 minute interval, the “remaining time” will be displayed for 4 seconds. For the last 5 minutes, the “remaining time” will be displayed every minute.
Ch Setup L EZ SETUP By operating the channel preset functions, you can preset your TV to the desired channels for viewing. 1 2 3 4 5 6 7 8 REMOTE KEYPAD 9 FLASHBACK VOLUME ENTER 0 100 (+)/(–) PERSONAL PREFERENCE A B C CH 8 VOL ; – MENU Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) L CHANNEL SETTING If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 AIR/CABLE setting 1 2 Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) 2 How to save broadcast TV channels into memory. POWER CATV TV DVD VCR DISPLAY INPUT 3 VOLUME 4 5 6 (+)/(–) 7 8 9 1 2 ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C CH 8 VOL ; – MENU 9 CH MUTE POWER (DVD/VCR) 1.1 1.2 1.3 Press MENU to access the MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”. Press VOL (+) or (–) to access CH SETUP mode, then press CH UP (8) or DOWN (9) to move the “a” mark to “CH SEARCH”.
Ch Setup (Continued) 3 How to add or erase weak, additional or unwanted channels from TV memory. 1 Press MENU to access the MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) L PERSONAL PREFERENCE By setting the PERSONAL PREFERENCE channels in advance, you can select your favorite channels easily. 1 2 3 4 5 6 7 8 A B MENU → 8 9 CH 100 C CH 8 VOL ; – (+)/(–) D CHANNEL UP (8)/ DOWN (9) : VOL + 9 CH g SKIP f MUTE 9 VCR-CH 8 POWER (DVD/VCR) Press MENU to access the MAIN MENU screen. Press CH UP ( 8 ) or DOWN ( 9 ) to move the “a” mark to “CH SETUP”.
Ch Setup (Continued) L UNIVERSAL PLUS FUNCTION VCR or DVD input mode will be selected automatically by pressing the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE CONTROL. VOLUME B C CH 8 VOL ; – MENU MUTE Press MENU to access the MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “CH SETUP”.
Set Up L ENERGY SAVE This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduce the brightness of the TV to a level that consumes approximately 20 percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions.
Set Up (Continued) L BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received. 1 2 Press MENU to access MAIN MENU screen. Press CH UP (8) or DOWN (9) to move the “a” mark to “SETUP”.
Using the Video and Audio Input Jacks L Connecting video equipment for playback of video material. • When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting video device equipped with video output terminals.
Using the Video and Audio Input Jacks (Continued) (Rear connection terminals of TV) Video Equipment IN 1 COMPONENT Video Equipment with Component Video (Component Color) Output Jacks (Y, PB and PR) Y R LINE OUT AUDIO PB L PR VIDEO To AUDIO OUTPUT (L/R) To AUDIO OUTPUT (L) To AUDIO OUTPUT (R) L To COMPONENT VIDEO OUTPUT Jacks To VIDEO OUTPUT R L To watch video material playback. • Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you wish to play.
Using the Audio Output Jacks L These jacks are used for connecting an external audio amplifier. The STEREO/MONO/SAP, VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or directly on the TV itself. These jacks relay the audio signal of all programs being displayed on the TV screen. (AUDIO OUTPUT JACKS are located on the rear of the cabinet.
Operation of Remote Control L Universal Remote Control With the purchase of your television set you also have received the latest innovation in remote control technology. With its easy-to-use push button keyboard, your Remote can control your television set and most infrared remote controlled VCRs, cable TV converters and DVDs as well.
Operation of Remote Control (Continued) POWER TV POWER REMOTE KEYPAD CATV TV DVD VCR DISPLAY INPUT 1 2 3 4 5 7 8 CATV/DVD-TV/VCR DISPLAY 6 9 ENTER FLASHBACK 0 100 PERSONAL PREFERENCE A B C CH 8 VOL ; – MENU 9 CH g SKIP f MUTE PLAY : REW ( CHANNEL UP (,)/ DOWN(9) 9 VCR-CH 8 POWER (DVD/VCR) POWER (DVD/VCR) D : VOL + L STOP REC FWD ) PAUSE J TV • CATV • VCR • DVD L HOW TO IDENTIFY A VCR The remote control may already be set to operate your VCR.
Operation of Remote Control (Continued) TV POWER POWER REMOTE KEYPAD CATV TV DVD VCR DISPLAY INPUT 1 2 3 4 5 7 8 CATV/DVDTV/VCR DISPLAY 6 9 FLASHBACK ENTER 0 100 PERSONAL PREFERENCE A B C CH 8 VOL ; – MENU D : VOL + 9 CH 9 VCR-CH 8 POWER (DVD/VCR) PLAY : REW ( CHANNEL UP (,)/ DOWN(9) g SKIP f MUTE L STOP REC FWD ) PAUSE J TV • CATV • VCR • DVD TIPS ON IDENTIFYING YOUR VCR: If your VCR model does not have the CHANNEL UP function on its remote control, it cannot be identi
Operation of Remote Control (Continued) POWER TV POWER REMOTE KEYPAD CATV TV DVD VCR DISPLAY INPUT 1 2 3 4 5 7 8 CATV/DVD-TV/VCR INPUT DISPLAY 6 9 FLASHBACK ENTER 0 100 PERSONAL PREFERENCE A B C CH 8 VOL ; – MENU 9 CH 9 VCR-CH 8 PLAY : REW ( CHANNEL UP (,)/ DOWN(9) g SKIP f MUTE POWER (DVD/VCR) POWER (DVD/VCR) D : VOL + L STOP REC FWD ) PAUSE J TV • CATV • VCR • DVD L HOW TO IDENTIFY A DVD The remote control may already be set to operate your DVD.
Operation of Remote Control (Continued) L HOW TO IDENTIFY A CABLE CONVERTER L To Identify Your Cable Converter –Direct Entry Method. Use the following steps and list to quickly find the remote control code for your cable TV converter. • First look up your converter’s remote code number before going through the direct code entry steps below. • If this procedure does not identify your conver ter, use the Search method for identification. (1) Press CATV/DVD button.
Before Calling for Service Is TV plugged in? Power at outlet? X Is TV’s POWER button on? X X Color on Part of the Screen Appears Distored X External Electrical Noise Interfering with TV’s Operation No Picture or Sound X Dark and Blank Picture X Sound OK, Picture Poor X Picture OK, Sound Poor Ghosts in Picture X Picture Blurred X X X If outside antenna is being used, check for broken wire. X Check for local interference or external electrical noise.
(ESPAÑOL) Antes de llamar al servicio de reparaciones X X X X El color se ve distorsionado en parte de la pantalla X Imagen oscura y en blanco X Interferencia de ruido eléctrico externo con el funcionamento del televisor Imagen adecuada, sonido malo X No hay imagen ni sonido X Imagen borrosa X Sonido adecuado, imagen mala X Franjas en la imagen X Imagen fantasma X Mala recepción de algunos canales No hay color X Imagen débil Imagen distorsionada El mando a distancia no funciona
(FRANÇAIS) Avant d’appeler un réparateur X X X X Couleur sur une partie de l’écran semble altérée X Image sombre et vide X Bruit électrique extérieur interférant avec le fonctionnement du téléviseur Image normale, son médiocre X Ni son, ni image X Image brouillée X Son normal, image médiocre X Lignes ou rayures dans l’image X Images fantômes X Faible réception de certains canaux Pas de couleur X Image affaiblie Distorsion de l’image La télécommande ne fonctionne pas L’image défi
Specifications MODEL 20F630 Receiving System NTSC Stereo Broadcast MTS/SAP Reception Channels AIR VHF 2-13 ch UHF 14-69 ch CATV 1-125 ch Channel Tuning 181-channel Reception PLL tuning system Antenna Input Impedance VHF/UHF 75 ohm Unbalanced Screen Size (Visible Area) 21˝ Diagonally Measured (50.8 cm) Terminals Audio/Video input × 2 (Front x 1, Rear x 1), COMPONENT-IN × 1 (Rear), Audio Output × 1 (Rear) Sound Output 2.
Limited Warranty CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
