User Manual
15
L MTS (Multichannel TV Sound)
This circuit allows reception of stereo or bilingual TV sound.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to “AUDIO
SELECT”.
3 Press
VOL (+)
or
(–)
to access AUDIO SELECT mode.
4 Press
VOL (+)
or
(–)
to select “STEREO”, “SAP” or “MONO”.
5 Press
MENU
to exit.
Ex:
Actual screen indicating ON AIR when receiving STEREO broadcasts.
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to fixed monaural mode.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is
determined by the video source.
Audio Select (20LK62 only)
(MAIN MENU screen)
→
(AUDIO SELECT mode)
(Channel call on screen)
SET UP
TIMER
VIDEO ADJUST
AUD I O SELECT
CAPT IONCLOSED
PARENT CONTROL
ENERGY SAVE
SELECT
: SAPMTS
AUD I O
STEREO SAP MONO
MO O
S
SA
E
P
N
IR
12
REO
ON A
T IRON A
15-18 20LK32/62 [E].p65e 5/17/01, 12:07 PM15