User Manual
18
2 3 0
1
NI PUT SECRET No .
VEWT
2H
IIMER
00M
OFF
STATU
VEWINGITIME
TIME
5H 00M
S:ON
– – –
–
NIPUT SECRET No.
IPUT ESNCRETNo .
****
RRECT
INC
O
S
ECRET No . I S
TMEO
–
IVER
IPUT ESNCRETNo .
–––
TMEOIVER
IPUT ESNCRET
No .
****
– – –
–
NIPUT SECRET No.
→
8 Enter the 4-digit SECRET No. using the
REMOTE
KEYPAD
.
9 Press
MENU
, and SECRET No. is registered.
Example
• To restrict anybody from watching the TV for 5 hours, after watching
the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish. For
example, they could watch 1 hour of TV, turn TV off for 30 minutes,
then turn TV on and watch the remaining 1 hour on the VIEWING
TIMER.
L
To change the VIEW TIMER settings. (SECRET No. is registered)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step
3. Press
VOL (+)
or
(–)
, and “INPUT SECRET No.”
will be displayed.
2 Enter the 4-digit SECRET No. using the
REMOTE
KEYPAD
, and the VIEW TIMER access screen will
be displayed. Repeat step 5 ~ 6.
Note:
• When you choose the correct SECRET No., the VIEW TIMER access
screen is displayed. If the wrong SECRET No. is chosen, “SECRET
No. IS INCORRECT” is displayed. Input the SECRET No. again in
this case.
L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit SECRET No. using the
REMOTE
KEYPAD
. When you choose the correct SECRET
No., the VIEW TIMER is canceled. If the wrong
SECRET No. is chosen, “SECRET No. IS
INCORRECT” is displayed. Input the SECRET No.
again in this case.
L To cancel the VIEW TIMER setting or change the SECRET No. (When you forget the SECRET
No.)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step
3. Press
VOL (+)
or
(–)
, and “INPUT SECRET No.”
will be displayed.
Parent Control (Continued)
15-18 20LK32/62 [E].p65e 5/16/01, 2:57 PM18