User Manual

E 15
Channel setting
Enables individual channel setting.
MENU
PICTURE
SOUND
FEATURE
CH-SETTING
1 Press
MENU
to call MENU
screen.
2 Press
CH
/
CH
to
select “CH-SETTING”.
CH-SETTING
POSITION
COLOUR-SYSTEM
SOUND-SYSTEM
SKIP
FINE
NICAM
IGR
CH12
AUTO
B/G
ON
ON
ON
210.35MHz
SELECT CH ADJUST RETURN MENU
LANGUAGE TV/VIDEO
MPX
SURROUND
CH
CH
NORMAL
G1577SA
TV/TEXT
123
456
78
0
9
MENU
BACD
CH
CH
MENU
Settings and adjustments
3 Press / to
display CH-SETTING menu.
4 Press
CH
/
CH
to
select desired setting.
5 Each time you press
/
, setting for individual
items changes as follows:
• POSITION
The channel position changes to the higher or lower number.
• COLOUR-SYSTEM
AUTO SECAM
N443N358
PAL
• SKIP
ON
OFF
Channel numbers with a “
” mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set “SKIP” to “OFF”.
• FINE
The frequency changes to allow fine tuning.
• NICAM
ON (NICAM sound)
OFF (Monaural TV sound)
• IGR(German stereo system)
ON (IGR sound)
OFF (Monaural TV sound)
• SOUND-SYSTEM
B/G D/K M I
6 Press
MENU
twice to display normal screen.
• When you select AV1 or AV2 for
the channel position, the CH-
SETTING menu changes as
shown on the right.
CH-SETTING
POSITION
COLOUR-SYSTEM
AV1
AUTO
• Switching COLOUR-SYSTEM:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the receiving
signal system and changes the reception system of the TV set. When the picture is not stable, switching
to an appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency for fine
tuning.
• When using FINE, the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure. See
14
.