User`s manual

INSTALLATIONS
MB700 User’s Manual 7
Installing the Memory (DIMM)
The MB700 Industrial Motherboard supports three 168-pin DIMM
sockets for a maximum total memory of 768MB in SDRAM type. The
memory capacities supported are 32MB, 64MB, 128MB and 256MB.
Installing and Removing DIMMs
To install the DIMM, locate the memory slot on the Industrial
Motherboard and perform the following steps:
1. Hold the DIMM so that the two keys of the DIMM align with those on
the memory slot.
2. Gently push the DIMM in an upright position until the clips of the slot
close to hold the DIMM in place when the DIMM touches the bottom
of the slot.
3. To remove the DIMM, press the clips with both hands.
Top View of DIMM Socket
DIMM
Lock
Lock
Lock Lock