User`s manual

LAN DRIVERS INSTALLATION
60 MB700 User’s Manual
Installing LAN Drivers for Windows NT
Note: It is recommended that you install the latest Service Pack for
Windows NT 4.0, available through Microsoft.
Follow the instructions below to configure it the Ethernet hardware
under Windows NT.
1. Double-click the Network icon in the Control Panel.
2. Select the Adapter tab.
3. Click Add. You'll see a list of adapters.
4. Don't select an adapter from this list. Instead, insert the
Intel adapter disk or CD into the appropriate drive and click
Have Disk.
5. Enter the appropriate drive for your disk media (A:)
and click OK. Then follow the prompts to complete installation.
When the adapter is added you'll see a new adapter listed in the
Network adapters list.
6. Click Close to finish and configure any protocols as prompted.
7. Restart Windows NT when prompted.