User`s manual

INTRODUCTION
MB700 User’s Manual 3
Specifications
Processor
Supported
Socket 370 support Intel Celeron / Coppermine,
300MHz~850MHz, 66MHz/100MHz Bus Speed*
Chipset Intel 440BX AGPset
BIOS Award BIOS
Supports ACPI, DMI, PnP
System Memory 3x DIMM sockets support up to 768MB capacity
3.3V supported
ECC supported
Multi I/O Chipset
Winbond 83977TF and 83877TF (keyboard controller is
built-in 83977TF)
I/O Features 1x FDD (up to 2.88MB, 3 Mode, LS120)
1x Parallel Port (EPP, ECP Port)
4x Serial Ports (3x RS232, 1x RS232/422/485)
1x IrDA TX/RX Headers
Bus Master IDE
2x IDE interfaces for up to 4 devices; supports PIO Mode
3/4 or Ultra DMA/33 IDE HDD, and ATAPI CD-ROM
On-board VGA C&T 69000 PCI VGA Controller
Support CRT & LCD Panels
VGA CRT connector on board
1024x768 (High Color) resolution
2MB embedded memory
Optional C&T 69030 VGA Controller with 4MB embedded
memory
On-board Audio ESS Solo-1 (ESS1938) PCI Single Audio Chip
Provides high-quality audio processing
On-board
Ethernet
Intel 82559 Ethernet Controller (1x LAN or 2x LAN)
32-bit performance, PCI bus master capability
Supports 10/100Mbps data transfer rates
Hardware
Monitoring
Winbond W83781D IC
Monitors CPU/system temperature and voltages
SSD Interface For M-Systems 2MB~144MB DiskOnChip flash disk
Watchdog Timer 16 levels
Digital I/O 2 In / 2 Out
Expansion Slots 5 ISA slots, 2 PCI slots, 1 MicroPCI socket
Form Factor ATX
Dimensions 305mm x 244mm (12” x 9.6”)
Power
Requirement
+5V : 10A (max)
+3.3V : 5A (max)
+/-12V : 200mA (max)
* MB700 does not support Intel 0.13-micron Tualatin processors.