User Manual
E 13
Picture In Picture (PIP) Function
With the VIDEO input, you can watch two picture at same time: one
from the TV channel and the other from the VIDEO input.
1 Press
PIP ON/OFF
.
•
The inset is displayed to indicate PIP is “ON”.
2 Press
PIP ON/OFF
again.
•
The inset screen is disappears to indicate PIP is “OFF”.
PIP On/Off
51
PAL
B/G
( AV2)
1 When
PIP.TV/VIDEO
is pressed, the input
for the inset changes in the following
order.
2 When the inset is displayed, the channel number for INSET is
changed by pressing
CH
/
CH
.
Channel Selection of Inset Screen
Channel number for
inset screen
AV1 (or COMPONENT) AV2
TV programme
TV/TEXT
PIP
ON/OFF
TV/VIDEO
SURROUND CH SCAN
NORMAL
CH
CH
MENU
BACD
MOVE
PIP.TV/VIDEO
FREEZE
SWAP
123
456
78
0
9
PIP.TV/VIDEO
MOVE
SWAP
FREEZE
PIP ON/OFF
CH
CH
1 Press
PIP ON/OFF
.
•
The inset is displayed.
2 Press
MOVE
to move the inset
position as shown on the right.
MOVE
1 When the inset is displayed, it is changed over with the main
screen by pressing
SWAP
.
2 The inset displays a still picture when
FREEZE
is pressed.
•
Pressing
SWAP
when FREEZE is activated will cancels FREEZE and the
inset changes over with the main screen.
•
Press
FREEZE
again to cancel the FREEZE mode.
SWAP/FREEZE
• The same TV channel screen will be displayed for main screen and inset screen, if the selection
channel of main screen and inset screen are TV channel.
• Even if the COMPONENT terminal is connected, the inset screen do not shows COMPONENT signal.
• When the colour system between the main screen and the inset is different, the size (aspect ratio) of
the inset screen might be bigger or smaller.
Useful features