Operation Manual, Quick Start Guide

BEFORE USING THE MACHINE
23
Large capacity tray (MX-LC12)
4
Press the operation button.
The paper table goes up. The operation button blinks while
the paper table goes up. The button lights up when the
paper table has gone up.
1
Pull out the paper tray.
Gently pull the tray out until it stops.
2
Fan the paper.
Fan the paper well before loading it. If the paper is not
fanned, multiple sheets may feed at once and cause a
misfeed.
3
Place the paper in the centre of the
paper table.
Load the paper with the print side facing down. The stack
must not be higher than the indicator line (maximum of
3500sheets
4
Gently push the paper tray into the
machine.
Push the tray firmly all the way into the machine slowly.
Forcefully inserting the paper may cause skewed feeding
and paper misfeeds.
Indicator
line